Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gigglepin dual motor winch??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 166
Joined: Thu Jan 15, 2009 8:18 pm
Location: Yeppoon CQ

Contact:
Contact swb_ute

Post by swb_ute »

That is the second one i have seen brake there.
www.teamecr.com.au
Top
Posts: 56
Joined: Tue Sep 20, 2005 3:20 am

Post by 90pickup »

swb_ute wrote:That is the second one i have seen brake there.
This could get interesting then.....
Top
Posts: 26
Joined: Thu Sep 20, 2007 8:59 pm
Location: Running from the BBDA

Post by Farva »

Mudzuki wrote:
Slunnie wrote:Increased linespeed will decrease the pull on the rope - you'll be less likely to snap the rope with the same given motor when running higher linespeed gears.
Yep, but the fact is that you have two 12 volt 6HP motors being fed 24 volts. That sort of power from the motors can make sort work of a rope if it isn't in good condition, no matter which gearing you choose.
thats the point i was trying to get out, trying to get the right ratio without breaking too much rope
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 128 guests