Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MQ Question/Queries
my u-bolts are tight as.
Im thinking that it might be something to do with the steering box not being tight enough ( too much slack ) or the self-centring steering dampener has come abit lose from the drag link causing wobbles.
I greased all the ball joints and drive shafts and everything and it made alot of vibrations go away and the major "steering death wobble" go away but i have a constant small death wobble, as if its about to go but doesnt.
Ill get to it though....
With regards to the WD40, its a qiuck fix for cleaning a dying temporarily to get a home.
I use co contact cleaner on my stuff and havnt had any dramas
screwy
Im thinking that it might be something to do with the steering box not being tight enough ( too much slack ) or the self-centring steering dampener has come abit lose from the drag link causing wobbles.
I greased all the ball joints and drive shafts and everything and it made alot of vibrations go away and the major "steering death wobble" go away but i have a constant small death wobble, as if its about to go but doesnt.
Ill get to it though....
With regards to the WD40, its a qiuck fix for cleaning a dying temporarily to get a home.
I use co contact cleaner on my stuff and havnt had any dramas
screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Okay seem to be having more problems with the shut off motor. I dont actually think that it is the motor itself cause i have seen it moving and looks fine and unrestrictive. What it does seem like is wherever the motor gets its signal from. What i mean there is obviosly something that tells it to shutoff and then reset itself. Sometimes my car will shutoff, othertimes it wont and occasionally it will surge like the shutoff motor has only gone halfway and the car is still running but only on half the fuel.
Was going to take it apart but dont know if this will sought out my problems. I also took it to an auto sparky and all he did was tighten a plug and he said for him to sort out the problem fully it could cost upwards of $500
Help
Marc
Was going to take it apart but dont know if this will sought out my problems. I also took it to an auto sparky and all he did was tighten a plug and he said for him to sort out the problem fully it could cost upwards of $500
Help
Marc
Who is online
Users browsing this forum: No registered users and 3 guests