Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
lump_a_charcoal wrote:Pete, unless you have purchased your OTT kit already, check out the OTT stage II from Rocky Road, I reckon it is great.
It utilises the kingpin and caliper mounts, and is custom made for your lift...
x2 on the rocky road very tough unit
I have the two arms for sale if you want as im spua now
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
lump_a_charcoal wrote:How do Snake and Suzistore stay in business, when you can buy a comparable kit form the states for less than half?
its a supply and demand thing no doubt... suzistore only has 1 on the shelf, any more would be made to order... where as the USA has a higher demand for them, so they can get say 50 made at a time and dramatically cut their production costs - let alone recovering the time spent on design etc.
The only thing i would question on the RRO kit is engineerability - the suzistore one meets WA's tough engineering standards (infact exceeds them). You'd need to question the materials its made from etc etc before knowing if you could engineer a vehicle with their kit. That said though some engineers are fussier than others, and may not get into the steel used and stresses involved etc as much as mine did.
