Outer Limits 4x4 Board

This is awesome. Well done!

A few more pics, inculding the custom CDW tube front arms I made,

awesome. looking tough.

The radius arms look great but may i ask why? tube radius arms have been attempted numerous times without very much success. although they have been as OE replacement on heavy GQ/GU.

Keep up the good work.

Thanks

I was going to get some front arms made from 25mm bisalloy plate, but the guy shut his business, also the weight of them was a bit of a turn off.
these are 38mmx 3.5mm rollcage tube, one grade down from chromoly,
light and i could make them myself for pretty cheap,
My other thought was an "i" beam style,

That is one smicko looking exhaust system, keep up the good work. love me rockys

Still chipping away at her, have built the gearbox, manualised th400,
All bolted up to the adapter, waiting on a torque converter and it'll be ready to bolt up.

nice, good to hear

Any more progress? Pretty cool looking little wagon ya got there

Sorry guys, Budget had the arse fall out of it, Done a few little things, ran all the brake lines, rear one goes thru the inside of the cab, stripped the engine wiring loom ready for the pcm, built the auto myself, full manualised th400, and assembled onto the transfer case ready to go in once I get the torque converter,

[img][/img]

It takes small steps to climb the mountain, we will wait with antisipation. Keep it up dude

I have to admit when I read the start of the thread .. i was thinking .. yeah this is not going anywhere.

man was I wrong, looking like it should be a lightweight brawler .. good stuff.

Is this still going ahead? Can I please get some more photos? I am currently planning my build, which will be similar but will be more crawler orientated with a 5l lux turbo diesel twin lockers and full ccda cage, and of course 35's.

Hey guys, my apologies for being a slackass here, some other priorities have taken my time the last 6 months.. :(
Anyway, have done some on her, stripped the engine loom, pulled out all unneccesary wires, had the Vats taken out of the pcm, plugged the bare loom up and gave it a test run to check the wiring, Started!! sweet
Fitted the gearbox with the new torque converter, will need to cut a notch out of the crossmember to allow for full down travel for the front tailshaft, changed the front and rear hard brake lines, so will now run 2 short braided lines front and rear, onto a cotrol arm and along to the diffs, saves haveing a 450mm single flexy line flappin around above the diffs. Picked up an ex v8 supercar PWR radiator, (friggin huge!) to mount, probly rear mount it,
Heres a vid of it starting

Awesome to see it going. How long till its finished?

Prob another 12 months :( just bought a house,

its coming along well, keep chipping away at it.

Apologies!

Have stripped out the cab and getting ready to do the cage,

Finished the engine loom and got it all in place,

Have just put our name on the entry list for the 2014 Outback Challenge,

Definatly better get into gear and finish this damn thing!

awesome

Some pics of the cage, ready for paint and bolting in