Peter Haasmann's Jimny is in the oct 2003 issue (no. 58) 4WD monthly. The control arms were strengthened by welding heavy wall tube to them, and the mounts were gusseted with 3mm steel. (this all in the article in the mag, so if i wrong dont shoot me)
Layto....
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
control arms
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
yeat i seen the 3 mm plate thats wat i neeed to do to get the coil mounts parrallel again. sort of caster correction for the rear diff
TOYZUKI 96 coily zook,lux diffs, 3 inch suspension lift,3 inch body lift, 33'sMTRS,series 4 hopper,power steer,twin air lockers,4 LINK front and rear,2 inch spacers(GOT WIDTH)
Who is online
Users browsing this forum: No registered users and 15 guests