Page 2 of 4

Posted: Tue Jul 27, 2004 11:04 pm
by muppet_man67
RB zook wrote:so that tank will go in a coily? and could it sit up higher coz i got 3 inch body lift?


wat $$$ would i be lookin at

If it sits hard up against the rails then you would have to do something with the exaust. probbably not a big job but something to think about.

Posted: Tue Jul 27, 2004 11:10 pm
by antt
just wondering why ya didn't do any protection for the front guards sam

Posted: Wed Jul 28, 2004 12:16 am
by OVERKILL ENG
antt wrote:just wondering why ya didn't do any protection for the front guards sam



I will antt ran out of tube and havn't worked out how to mwke it look neat
SAM

Posted: Wed Jul 28, 2004 12:20 am
by bigsteve
OVERKILL ENGINEERING wrote:The rear lights are $60 each
SAM


Are they catalogue buys e.g. Narva/hella type part number??

And would they flush mount in the tailgate??

Cheers

Steve

Posted: Wed Jul 28, 2004 12:37 am
by OVERKILL ENG
bigsteve wrote:
OVERKILL ENGINEERING wrote:The rear lights are $60 each
SAM


Are they catalogue buys e.g. Narva/hella type part number??

And would they flush mount in the tailgate??

Cheers

Steve


They are hella
they have about a 3mm lip but the rest would be able to be resessed
SAM

Posted: Wed Jul 28, 2004 12:40 am
by bigsteve
OVERKILL ENGINEERING wrote:
bigsteve wrote:
OVERKILL ENGINEERING wrote:The rear lights are $60 each
SAM


Are they catalogue buys e.g. Narva/hella type part number??

And would they flush mount in the tailgate??

Cheers

Steve


They are hella
they have about a 3mm lip but the rest would be able to be resessed
SAM


Cool

Do they flash reeeeealy fast?? Given that the LED's take so little voltage??

Posted: Wed Jul 28, 2004 12:26 pm
by DeWsE
How about front end protecting like the front clip on bazooc!!!!!!!! That was the sweetest front end I have ever seen!

Posted: Wed Jul 28, 2004 1:30 pm
by Mudzuki
Are the rear leads a stop/tail combo? Look like just stop to me.

Posted: Wed Jul 28, 2004 8:20 pm
by OVERKILL ENG
big steve they flash normally
And they are a stop tail light in one.

I am looking at joining the front into the cage just havn't worked out how to do it neatly. Any ideas you photoshop guru's :D

Posted: Wed Jul 28, 2004 8:24 pm
by RUFF
OVERKILL ENGINEERING wrote:big steve they flash normally
And they are a stop tail light in one.

I am looking at joining the front into the cage just havn't worked out how to do it neatly. Any ideas you photoshop guru's :D


Better hurry up and work out how to do this, because after this weekend you will also be working out how to get them guards back out of the engine bay :D

Posted: Wed Jul 28, 2004 8:26 pm
by OVERKILL ENG
RUFF wrote:
OVERKILL ENGINEERING wrote:big steve they flash normally
And they are a stop tail light in one.

I am looking at joining the front into the cage just havn't worked out how to do it neatly. Any ideas you photoshop guru's :D


Better hurry up and work out how to do this, because after this weekend you will also be working out how to get them guards back out of the engine bay :D


:rofl: :rofl: :finger:

Posted: Wed Jul 28, 2004 8:46 pm
by antt
are you running the mongrels sam or what?

Posted: Wed Jul 28, 2004 9:15 pm
by OVERKILL ENG
33 mtrs

Posted: Wed Jul 28, 2004 9:21 pm
by antt
:cool:

do the zuk section proud sam :armsup:

Posted: Wed Jul 28, 2004 9:26 pm
by OVERKILL ENG
Iwill try but me thinks i might be in a little over my head :lol:

Posted: Wed Jul 28, 2004 9:28 pm
by antt
we can sabotage daves runner, and the other daves lux.......all them other pommy buggy's will self-sabotage themselves :D

Posted: Wed Jul 28, 2004 9:35 pm
by DILLIGAF
What is a cage like that worth?
And are you gonna sell the centipedes?

Posted: Wed Jul 28, 2004 9:52 pm
by OVERKILL ENG
DILLIGAF wrote:What is a cage like that worth?
And are you gonna sell the centipedes?



What centipedes
The cage is worth$1500

Posted: Wed Jul 28, 2004 9:53 pm
by OVERKILL ENG
antt wrote:we can sabotage daves runner, and the other daves lux.......all them other pommy buggy's will self-sabotage themselves :D



So true :D

Posted: Wed Jul 28, 2004 10:05 pm
by rocknferoza
Looking good Sam :finger:
Can't wait 2 see it in action this weekend ;)


Video camera will be there :armsup:

Posted: Thu Jul 29, 2004 7:42 am
by moose
OVERKILL ENGINEERING wrote:Iwill try but me thinks i might be in a little over my head :lol:


thats not hard !!! :D I,ve stood next to you !!!! :rofl:

Posted: Thu Jul 29, 2004 8:36 am
by Drewfus
OVERKILL ENGINEERING wrote:I am looking at joining the front into the cage just havn't worked out how to do it neatly. Any ideas you photoshop guru's :D


1. the best way to protect something is to not have it 'there' in the first place................ so in this instance, rather than trying to protect those flares which stick out attracting rocks, I'd be removing them, and either trimming the gaurds (see attached pic 1)

2. living with the carnage that is destined, and when destroyed, replace the entire front clip with a tube job similar to the aztec

3. since the plumbers rack really isn't the most discrete or 'slick' looking item (let's be realistic), just add a curved bar which follows the shape of the arch mounting at the sill at the a pillar. Reason being that when the front bar hits a rock (a reaalllllly big one) it will want to deform and push back. If it's a straight link to the bend near the rear of the bonnet, it will push the unsupported 'rack' back into the body. Hence, if the link is curved, and mounted as described, there is less chance of 'structural' damage.

Personally, I wouldn't bother doing anything in this area other than replace the flares with rubber, as to be realistic, if your going to be doing some 'hardcore' wheeling, it's destined to be damaged. Nature of the beast.

All the best for the weekend, wish I was there to support you guy's on.

Posted: Thu Jul 29, 2004 5:11 pm
by germo
Yeah put a tube front on it for comps.

hey look (idea bubble) I have one that I don't want!
sell for cheap or swap front clip.
pics below.

the tube bit that holds the bonnet up and the winch bar. they are seperate items but both not needed.

ashley ;)

Posted: Thu Jul 29, 2004 5:14 pm
by grimbo
Sam perfect opportunity to develop a tube front that you can mount a front clip to for daily driving and take off for 4wheeling

Posted: Thu Jul 29, 2004 9:33 pm
by OVERKILL ENG
Did the front of the exo today and tied it into the front bar no pics yet sorry.
the trouble with making a removable clip for comps is getting defected on the way there.
sam

Posted: Thu Jul 29, 2004 9:39 pm
by big38l
antt wrote:we can sabotage daves runner, and the other daves lux.......all them other pommy buggy's will self-sabotage themselves :D



You don`t need to sabotage daves runner, he`ll do that himself.

Posted: Fri Jul 30, 2004 1:46 pm
by DeWsE
OVERKILL ENGINEERING wrote:Did the front of the exo today and tied it into the front bar no pics yet sorry.
the trouble with making a removable clip for comps is getting defected on the way there.
sam



But wouldn't you trailer it to the comp, I mean their is a very high chance you will break it!

Did you ever get pulled up for the one on bazook?

Posted: Fri Jul 30, 2004 2:23 pm
by antt
sam is driving it up to puosu i think he said ;)

Posted: Fri Jul 30, 2004 2:47 pm
by OVERKILL ENG
DeWsE wrote:
OVERKILL ENGINEERING wrote:Did the front of the exo today and tied it into the front bar no pics yet sorry.
the trouble with making a removable clip for comps is getting defected on the way there.
sam



But wouldn't you trailer it to the comp, I mean their is a very high chance you will break it!

Did you ever get pulled up for the one on bazook?


The reason i built this rig is so I could drive it wheel it then drive home. If I wanted to trailer it then I would just build a buggy.

I never got pulled over in Bazzoc but I never drove it anywhere either.
SAM

Posted: Fri Jul 30, 2004 3:02 pm
by DeWsE
OVERKILL ENGINEERING wrote:
DeWsE wrote:
OVERKILL ENGINEERING wrote:Did the front of the exo today and tied it into the front bar no pics yet sorry.
the trouble with making a removable clip for comps is getting defected on the way there.
sam



But wouldn't you trailer it to the comp, I mean their is a very high chance you will break it!

Did you ever get pulled up for the one on bazook?


The reason i built this rig is so I could drive it wheel it then drive home. If I wanted to trailer it then I would just build a buggy.

I never got pulled over in Bazzoc but I never drove it anywhere either.
SAM


I see your point.