Posted: Thu Mar 13, 2003 7:09 pm
Show us some pics duncan !!!
Surfection wrote:Show us some pics duncan !!!
What aren't my drawings good enough for you!
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
Beadlocked rims drawings or info
Page 2 of 2
Posted: Thu Mar 13, 2003 7:18 pm
What aren't my drawings good enough for you!
Posted: Thu Mar 13, 2003 8:40 pm
bahaha, adrian your pic is going up on the wall at work !!!!!! 
Nah i'm just interested in putting a pic to the description !!
Nah i'm just interested in putting a pic to the description !!
Posted: Thu Mar 13, 2003 8:56 pm
Surfection wrote:bahaha, adrian your pic is going up on the wall at work !!!!!!
MY PIC
I HOPE ITS NOT GOING UP ON THE TOILET WALL!!!!!
Posted: Thu Mar 13, 2003 9:33 pm
ROFL Nah, i couldn't do that to BJ, he would feel so unloved !!
Nah, i couldn't do that to BJ, he would feel so unloved !!Posted: Thu Mar 13, 2003 11:04 pm
Found this pic on pirate, looks easy enough.
Posted: Fri Mar 14, 2003 12:32 am
That picture is exacly what I have done both plates were made out of 6mm plate I firstly marked them out then used a oxy to cut out the 2 rings tack welded them together in 4 places then drilled the holes the correct size for a 10mm tap I taped 4 holes so I could bolt them together and put them on a lathe to machine the inner and outer diameters then finished of the rest of the threaded holes the outside diameter is exactly the same size as a 15 inch rim sat it on top and tacked it in 4 places them stich welded it on so as to minimunize worpage to easy and it cost nothing will post some photos when a mate can get over here with his digital camera