Posted: Mon Nov 08, 2004 9:58 am
pm you..
anyone have any more examples
and mud4b the pm's didn't work
Page 2 of 4
Posted: Thu Nov 11, 2004 6:56 pm
Posted: Thu Nov 11, 2004 10:42 pm
http://jabbatron.fateback.com/Image0828.txt
Can't get it to work under IMG tags. Just open it in Explorer
Can't get it to work under IMG tags. Just open it in Explorer
Posted: Fri Nov 12, 2004 8:39 pm
jabtronic wrote:http://jabbatron.fateback.com/Image0828.txt
Can't get it to work under IMG tags. Just open it in Explorer
dude thats a verry tidy lookin rig good to see
Posted: Fri Nov 12, 2004 10:37 pm
where did you get those wheel arch flares?, i could go me a pair of them on my sierra, thats when i buy it of course. 
Posted: Fri Nov 12, 2004 10:46 pm
they are around $600 a set those flares they are bushwacker ones
Posted: Sat Nov 13, 2004 1:37 am
That's not my rig either 
Posted: Tue Nov 16, 2004 2:35 pm
here's another nice front bar
Posted: Tue Nov 16, 2004 5:38 pm
OVERKILL FRONT STINGER BAR
good design if you ask me
Posted: Tue Nov 16, 2004 7:09 pm
I got one 
Look at me picture
Look at me picture
Posted: Tue Nov 16, 2004 9:14 pm
ljxtreem wrote:I got one
Look at me picture
And it takes a good knock too
Posted: Tue May 17, 2005 4:56 pm
any more ??
Posted: Tue May 17, 2005 5:04 pm
redzook wrote:
OVERKILL FRONT STINGER BAR
good design if you ask me
Yeah awesome design. Wouldn't mind one of those!
Posted: Tue May 17, 2005 5:06 pm
Posted: Tue May 17, 2005 5:15 pm
Where can you get those Bushwhacker flares in Australia? They made your samurai look like a beast! ( plus the wheels )
I looked up the Bushranger Flexy Flares. They're only $100, but they don't look as good as the Bushwhackers.
Do Vitara's have the exact same arch as a Samurai?
I looked up the Bushranger Flexy Flares. They're only $100, but they don't look as good as the Bushwhackers.
Do Vitara's have the exact same arch as a Samurai?
Posted: Tue May 17, 2005 5:18 pm
Found the flares here, http://www.4wdworld.com.au/products/bushwacker/
Anyone know if I could put them straight on a 2Dr Vit ?
Edit: Man, they cost $380 a pair !! $760 to Flare my Vit, I think the Bushrangers are the ones I should use.
Anyone know if I could put them straight on a 2Dr Vit ?
Edit: Man, they cost $380 a pair !! $760 to Flare my Vit, I think the Bushrangers are the ones I should use.
Posted: Tue May 17, 2005 5:55 pm
if u talk to mud4b he can get u a tube bar from halfcut engineering
Posted: Tue May 17, 2005 7:04 pm
heres my half arsed attempt
Posted: Tue May 17, 2005 7:06 pm
heres my half arsed attempt
Posted: Wed May 18, 2005 6:44 am
Here's mine, made from scrap pipe.
Posted: Wed May 18, 2005 4:36 pm
Here's mine, you would have seen it at LCMP last weekend
Custom Off Road in Stafford made it for me...
Custom Off Road in Stafford made it for me...
Posted: Wed May 18, 2005 5:20 pm
KAOS tube bar
Posted: Wed May 18, 2005 10:44 pm
here is one I made for the GF's brother recently. Its 90 % finished but you get the idea
Posted: Thu May 19, 2005 11:48 am
Posted: Thu May 19, 2005 11:56 am
fair to muddlin shot of mine here;
http://pointnshoot.whoever.org/modules. ... icle&sid=2
still got the templates at home if you wanna copy em.
Spock
http://pointnshoot.whoever.org/modules. ... icle&sid=2
still got the templates at home if you wanna copy em.
Spock
Posted: Thu May 19, 2005 1:00 pm
Gutless wrote:here is one I made for the GF's brother recently. Its 90 % finished but you get the idea
Nice bar. Whats the specs on the suspension? I have seent the rear change but not the front.
Posted: Thu May 19, 2005 7:26 pm
Just RUF. it works better than i had planned
Posted: Fri May 20, 2005 5:32 pm
hey guys for somthing difrent my bar...
sory about the crap pic i took it on my fone,
sory about the crap pic i took it on my fone,
Posted: Sat May 21, 2005 2:14 pm
Here is my attempt
Posted: Sat May 21, 2005 2:15 pm
and another