Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Half Door Tech

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Contact:
Contact N*A*M

Post by N*A*M »

i cut down a drivers side door, folded a lip on the cut edge and riveted soft sheet tin/aluminium. droopypete might have some pics.

don't cut your hinges. just replace the screws with hex head bolts. if you can't undo the screws, apply direct heat to break the thread locking glue.
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

Mudzuki wrote:Bigsteve, from the pic it appears that you cut about 10mm above the crease on the door skin, is this correct?

Like the idea of c channel as it covers up the dodgy grinding work :lol:


I cut right on the high side of that crease, the C channel sat slightly higher
yeshemesh
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests