Outer Limits 4x4 Board

Guts wrote:I used, IHLE Werner and didn`t have a problem with him. From the 1st phone call to him till I had the report in my hand was only about 2 weeks.

He also called into my house here in Albury and looked at it on his way threw at about 10pm one night, then he hand delivered the report on his next trip threw Albury and that was at 8am one morning.

i hope i find a decent bloke like this guy

I used Enklemans on my Rangie with the Holden V8, am hoping to use them again with the chev deseil and 35's. They were real good to me, only had to change resonator and angle exhaust exited the vehicle, and carby was running to rich, they really liked the car.

Don't bother with this bloke, wouldn't certify a 2" lift with out having a spec sheet from the manufacturer on the lift blocks and seeing the calculation to determine the correct width of the bolts required due to the extended length of the bolts WTF ??????????

AKBARIAN Morry
Mobility Engineering
3/28 Leighton Place
HORNSBY
NSW 2077
E: morryakbarian@hotmail.com
P: (02) 4576 1451
F: (02) 4576 1606
M: 0428 225 521
SAE-A

Athol Mullen in Cardiff will do eng certs and is a good bloke to boot. Cheaper than Sydney engineers and will look at climax drop shackles for road use.

6.5 rangie wrote:I used Enklemans on my Rangie with the Holden V8, am hoping to use them again with the chev deseil and 35's. They were real good to me, only had to change resonator and angle exhaust exited the vehicle, and carby was running to rich, they really liked the car.

They said they wouldn't even look at my suspension and tyres...

anyone recomend a engineer in sydney that will do 35s and 4inch or more on a GU??

want to get mine done before the new laws come in...

revin wrote:

DirtPigs wrote:Mullen Automotive Engineering

Athol Mullen
BE MIEAsut CPEng AM.SAE.A MIAME
24 Newcastle St
Cardiff
2285

PH/Fax 02 4956 8030
Mob 0414 685 537

Athol no longer does Engineer certs was a top person to deal with but IHLE Werner is a former employee of Athols

i emailed Athol about engineering my suspension, tyres and body lift some time in Feb, and he said he could do it and gave me a price..... as far as i know, he has done certs since.... Nemesis comes to mind. I only just emailed him about adding the V8 to the list.... see what he says when he replies i guess.

j-top paj wrote:anyone recomend a engineer in sydney that will do 35s and 4inch or more on a GU??

want to get mine done before the new laws come in...

Bloke on my forum got 7" springs and 35's engineered on his Mav not long ago in Kirrawee i think..... i'll hunt him down and get a name. I know it was a costly exercise.....

thanks mate..

that one with the 7 inch lift wasnt for sale on ebay was it?
i think i saw a white shorty on there with 35s and 7inch lift not too long ago.

j-top paj wrote:thanks mate..

that one with the 7 inch lift wasnt for sale on ebay was it?
i think i saw a white shorty on there with 35s and 7inch lift not too long ago.

Frank said it was a guy named Werner he had to dig out the report for full details, i'm yet to receive them...... and no, his Mav isn't for sale. His is a blue LWB.....

A mate just got his patrol passed at
Bells Agriculture
12 Tarrant st
Warracknabeal
Vic
by Jamie Bell
(03)53981081

Reckons he is excellent to deal with, the car before him was a 350 chev into a ford escort

The current vicroads list is here....

http://www.vicroads.vic.gov.au/NR/rdonl ... ar2007.pdf

Anyone got any pricing or costs to get anything engineered, just wanting
to know if its worth the coin?

cheers Dan

what mods have you got?
mine was simple enough and didnt take very long to do, but if you have a heap of mods then id say it would cost a bit more

Cross over and duals.