Page 2 of 2
Posted: Sun Jul 31, 2005 8:55 pm
by batcho101
what is the biggest tyre u can fit with these guards or maybe with the diff moved forward 35mm? as i am not doing rears up front for now and love the look of these guards i 'd rather go this way..mine is an 84
Posted: Sun Jul 31, 2005 9:00 pm
by RUFF
customhilux wrote:can anyone make or sell these puppies
That is the same guard as pictured on Toymad's rig. They just dont line up well at all. They are made by AOR/Hannerman in the US. I wouldnt waste the money on getting them in from the US.
The moulds i had made do fit a little better but still need some work. If you still want a set contact Neil(GRUB)-
http://www.outerlimits4x4.com/PHP_Modul ... rofile&u=8 He has the moulds and may be interested in making some more. But the finished product still needs a little work to make them fit although they fit much better then the AOR ones.
Posted: Sun Jul 31, 2005 9:01 pm
by RUFF
batcho101 wrote:what is the biggest tyre u can fit with these guards or maybe with the diff moved forward 35mm? as i am not doing rears up front for now and love the look of these guards i 'd rather go this way..mine is an 84
I had 38.5/16/15 MT Claws and they cleared with the axle moved 2" forward.
Posted: Mon Aug 01, 2005 9:15 pm
by customhilux
RUFF wrote:customhilux wrote:can anyone make or sell these puppies
That is the same guard as pictured on Toymad's rig. They just dont line up well at all. They are made by AOR/Hannerman in the US. I wouldnt waste the money on getting them in from the US.
The moulds i had made do fit a little better but still need some work. If you still want a set contact Neil(GRUB)-
http://www.outerlimits4x4.com/PHP_Modul ... rofile&u=8 He has the moulds and may be interested in making some more. But the finished product still needs a little work to make them fit although they fit much better then the AOR ones.
hey ruff, u ended up taking yours back off and running stock one's didn't u.
also what is the extra mods ya have to do to them to get em to fit.
Posted: Mon Aug 01, 2005 9:19 pm
by RUFF
Would basicaly need trimming slightly in some areas and filling in others. I sold mine to another guy and he said they fitted fine so my body could have been bent. I ran steel guards because i knew i would damage them and they were easier to replace.
Posted: Mon Aug 01, 2005 9:24 pm
by customhilux
RUFF wrote:Would basicaly need trimming slightly in some areas and filling in others. I sold mine to another guy and he said they fitted fine so my body could have been bent. I ran steel guards because i knew i would damage them and they were easier to replace.
i don't know if it's worth it then,
cause they will be goin on my extracab, which i'm turnin into a comp rig,
whats a stock guard worth compared to the fibreglass one's.
Posted: Mon Aug 01, 2005 9:27 pm
by RUFF
Dont know what they are Worth you will need to contact Neil. I dont know if he still has the moulds or wants to make any more. Can buy new guards aftermarket for $70 each.
Posted: Mon Aug 01, 2005 10:04 pm
by customhilux
RUFF wrote:Dont know what they are Worth you will need to contact Neil. I dont know if he still has the moulds or wants to make any more. Can buy new guards aftermarket for $70 each.
i'll prolly just smash em, i always seem to land on mine now,
where's the aftermarket one's from.
Posted: Mon Jan 11, 2010 2:02 pm
by Dirty
Yes, digging up an old thread, but I am after some flared guards for an LN65.
Anyone have some current information on where I can get some, or if there are molds in someones shed I can make my own if you want to part with the molds.
- David.