Outer Limits 4x4 Board

Posted: **Mon Jul 14, 2003 8:02 am**

i booty fabbed at 34mm

Posted: **Mon Jul 14, 2003 7:22 pm**

springs came out on w/e and i checked, i did mine at 28mm now have my old skyjacker rear leaves up front and front is waaaay forward.

Posted: **Wed Sep 03, 2003 8:29 pm**

with the spring perch redrilling, Is a dropped drag link too long as mentioned in a previous post, and do I just shorten my torque rod.
Hey Guys I have pics it was my Norton's

Rob

Posted: **Wed Sep 03, 2003 9:03 pm**

Hard to say, you can cut some material off each end of the drop drag link if its a bit tight. You can shorten the torque rod to length, or make it adjustable - everything you need you can get at Bunnings - 14mm threaded rod and joining nuts.

Posted: **Wed Sep 03, 2003 11:01 pm**

Remove torque rod and forget about it, everyone i know who has redrilled the perches the dropped draglink has still been to long and needs about 15mm removed from each end - and possibly a bit off the end of the TRE

Outer Limits 4x4 Board

Re drilling spring pearch to move axle forward?