Page 2 of 3

Posted: Mon Feb 28, 2005 7:33 pm
by high n mighty
80gged wrote:In regards to the $14000 thing they say that my job is small compared to their normal jobs so i guess that means i am less important...

Good to see a great debate...


That is the same amount that I am owed mate, dont worry about what they say. Give them an opportunity to fix it and then go for the throat.

I can't afford much after paying off my truck then another $14,000 these days.

I don't care what they say about the size of there normal jobs, your money was passed over for a service and if you didn't receive that service you are entitled to your $$$ back...

Posted: Mon Feb 28, 2005 7:33 pm
by RaginRover
You should be able to get them to fix it free of charge and brought up to a reasonable standard, however, you will not be able to take it somewhere else and get it fixed and present company A with the bill and expect them to pay. Even if you have documented evidence of every time you have been there and what was said, if you have not contacted dept of fair trade and gone through their process you won't get much help from them.

To achieve the kind of outcome you want you will have to bring legal action against them.

Fair trading will do what their name says, fair trading, ensure the trade is fair, talk to them, tell them the situation and the company and they can contact the company and speak to them on your behalf.

Tom

Posted: Mon Feb 28, 2005 7:36 pm
by RUFF
BOGAN wrote:
RUFF wrote:
80gged wrote:Thanks Tony for keeping this post going, by the way a reoputable company is a company that prides themselves on what they do not do a half job.

Sorry just voicing my opinion!!! Regards,...


I would say a repuatable company is a company that has a Reputation for good work and the Company you mentioned has many Franshises that have a very good reputation so i see no reason to Tar them all with the same brush.


That makes it easy to figure out who it was then :) :) :)


No it doesnt. Its not the first company you would generaly think of.

Posted: Mon Feb 28, 2005 7:40 pm
by BOGAN V8
RUFF wrote:
BOGAN wrote:
RUFF wrote:
80gged wrote:Thanks Tony for keeping this post going, by the way a reoputable company is a company that prides themselves on what they do not do a half job.

Sorry just voicing my opinion!!! Regards,...


I would say a repuatable company is a company that has a Reputation for good work and the Company you mentioned has many Franshises that have a very good reputation so i see no reason to Tar them all with the same brush.


That makes it easy to figure out who it was then :) :) :)


No it doesnt. Its not the first company you would generaly think of.


This is true but now i thought bout it there are a few :oops: :oops: :oops:

Posted: Mon Feb 28, 2005 7:46 pm
by BIG GQ
Hey Nathan where is the bit that says "and a HUGE thanks to Linc (BIG GQ) for all his help with advice and loan parts to try". :lol: :lol:

PS
Hey guys I know the company involved and the full story to the sarger :finger: :finger: :finger:

Posted: Mon Feb 28, 2005 7:46 pm
by Syzygy
Why was the company name removed so quickly?

If a good job is done we say so and recommend the place to others...

whats the issue with naming a company who clearly did a bad job?
seems a shame to be sensoring this sort of thing on a public forum

Posted: Mon Feb 28, 2005 7:48 pm
by beretta
So was it fair that he is pissed Big GQ????

Posted: Mon Feb 28, 2005 7:48 pm
by MissDrew
Syzygy wrote:Why was the company name removed so quickly?

If a good job is done we say so and recommend the place to others...

whats the issue with naming a company who clearly did a bad job?
seems a shame to be sensoring this sort of thing on a public forum
Because NOBODY wants to get into a legal battle that has nothing to do with them just because it was on their publicly run BB.

Posted: Mon Feb 28, 2005 7:56 pm
by Syzygy
Guts wrote:Because NOBODY wants to get into a legal battle that has nothing to do with them just because it was on their publicly run BB.


yeah, I was hoping that wasn't the reason..

it would be pretty sad if that actually happened.

Posted: Mon Feb 28, 2005 7:58 pm
by RUFF
Syzygy wrote:Why was the company name removed so quickly?

If a good job is done we say so and recommend the place to others...

whats the issue with naming a company who clearly did a bad job?
seems a shame to be sensoring this sort of thing on a public forum


Because when someone says on a public forum they got great service from a company that company doesnt want to sue my arse.

It is a shame and i too would like to know who to deal with and who not to deal with but with the way litigation works these days it just cant happen. There are too many lawyers out there trying to milk every cent out of every person they possibly can. And they are not going to get a cent out of me or my Website if i have anything to do with it.

Posted: Mon Feb 28, 2005 8:01 pm
by spazbot
what did $14,000 in work get you ?
or was supposed to get you

and dont forget there is alsways 2 sides to the story, normally alot changes when the other party gets to have thier say on the forum 2

Posted: Mon Feb 28, 2005 8:01 pm
by BOGAN V8
then there would be no more limits :cry: :cry: :cry: :cry: :cry:

Posted: Mon Feb 28, 2005 8:03 pm
by blkmav
A little birdy told me,

Posted: Mon Feb 28, 2005 8:16 pm
by beretta
Careful Ruff, there might be a lawyer that takes offence to that statement! lawyers milking people.......no! :D

Posted: Mon Feb 28, 2005 8:19 pm
by BOGAN V8
imagine a world without them Lawyers :) :) :) :)

Posted: Mon Feb 28, 2005 8:20 pm
by BOGAN V8
my post are being deleted bugger

Posted: Mon Feb 28, 2005 8:20 pm
by RUFF
blkmav wrote:A little birdy told me,


And i think i made it pretty obvious i didnt want this site to have anything to do with naming this company. So posting what i have just removed isnt really a good idea is it :roll:

Posted: Mon Feb 28, 2005 8:20 pm
by ozy1
berett wrote:Careful Ruff, there might be a lawyer that takes offence to that statement! lawyers milking people.......no! :D


if 'shes' a hot lawyer, she can milk me for all its worth :D

sorry, off topic

Posted: Mon Feb 28, 2005 8:22 pm
by RUFF
BOGAN wrote:someone keeps attacking my post why ????????


That someone is ME. When court costs come out of your pocket you can post what ever you like.

The next post i need to moderate or remove will be the end of this thread :!:

Posted: Mon Feb 28, 2005 8:42 pm
by bogged
Syzygy wrote:Why was the company name removed so quickly?


Ruff and Sam quite like their houses, and would hate for Lionel Hutz to take them away...

Posted: Mon Feb 28, 2005 8:44 pm
by -Scott-
But I like Ruff's house, and Hutz was gonna sell it cheap... :cry:

Posted: Mon Feb 28, 2005 9:04 pm
by Red Rover
Mate I hear you. I always have had the diffs set up by one guy all the time. When I put the second locker in he was flat out so I relented and got another company to install the airlocker. It will be last time too. They left out the locking tabs on the bearing and when I jacked up the wheel it was flopping all over the place. Very slack & dangerous. They also did the same thing to a mates car when they fitted his air locker as well. The problem they use T/A's and one head mechanic to check it (and doesn't). The only I won't do myself is injector pump, other than that I'll do it myself. Of course I mean no disrespect to decent tradesmen, just been burnt before.

don't blame you for being majorly Shit off

Posted: Mon Feb 28, 2005 9:32 pm
by 80gged
Okay ladies i am BACK!!!

I forgot to say a HUGE thankyou to Linc BIGGQ for his assistance and his advice in this serious matter, trust me, if you don't beleive me he knows the Whole Story...

Regards,...

Posted: Mon Feb 28, 2005 9:33 pm
by fightara
Take it back to see if they will rectify all the problems.
If you no longer have any faith in the original shop then take it to another reputable company and have them go over the car.
Then re-approach the first one to rectify or respond to the problems found. If the problems persist, see in this order:
* Senior management
* MVRIC
* Dept of Fair Trading

But you must first give the original workshop the opportunity to answer your concerns.

They have been around for ages and should be eager to make sure their customers are not just happy, but ecstatic when they spend $14k in their shop.


What are people's opinions to do if this process doesn't result in a favourable outcome? I have a mate who's going through this process largely because he has ended up with a basically brand new and now unengineerable Hilux after paying a well-known fabricator to SAS it for him, amongst other things...

It would be good to hear some advice on what to do if this happens, as it's not the first story I've heard. I think that especially when playing around with suspension geometry there is definitely the potential to totally screw up a very expensive vehicle.

Posted: Mon Feb 28, 2005 9:38 pm
by 80gged
Come on guys lets keep this post going, great effort almost at 500 posts for only a couple of hours of work, great to see some realistic responses...

Regards,
80GGD

Posted: Mon Feb 28, 2005 9:40 pm
by Hoonz
what did u get done for $14000?

if i spent $14000 on my rig from standard if would be insane ...

Posted: Mon Feb 28, 2005 9:44 pm
by 80gged
Linc is putting some pics up

Posted: Mon Feb 28, 2005 9:45 pm
by up2nogood
Come on guys lets keep this post going, great effort almost at 500 posts



Sorry dude, that's the times it's been viewed. Not the post count.

Posted: Mon Feb 28, 2005 9:56 pm
by BIG GQ
This is the rig

Image

Image

Image

Image

Image

Image

Posted: Mon Feb 28, 2005 10:00 pm
by 80gged
Oh what a sexy truck... this is the truck that created so much controversy...