Has anyone tried to mod an old air intake to surround their lpg system?
If so what one did they use? I think the air filter is 26cm x 7cm
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
LPG and snorkel
Is it possible to get an airfilter box off a landcruiser. As these flow heaps of air.
Mount it on the P/S inner guard. Then run some tube to the top of the mixer/carby thing.
It might make it hard to fit dual batteries, but you would be able to get a good aircleaner. Which is pretty cheap to buy and flows pretty well. Also easy to then run a normal type snorkle.
Mount it on the P/S inner guard. Then run some tube to the top of the mixer/carby thing.
It might make it hard to fit dual batteries, but you would be able to get a good aircleaner. Which is pretty cheap to buy and flows pretty well. Also easy to then run a normal type snorkle.
THOUGHT FOR THE DAY....
Project K-Mart Stock Pot is complete.
This week I bought a large stock pot from Kmart about 29cm
Cut a hole in the lid to make the air intake base. Cut a hole on the bottom of the pot to match the plate that normally sits on top of the air filter. Then cut the pot hight down to fit together when bolted up.
Cut a 3" hole and attached a Galvanized section of pipe used for guttering and screwed and siliconed it in.
Now Im all ready to attached a 3" pipe to it which will run to the snokel when I get around to that
Im thinking 3" stainless pipe for snorkel, although it wont be a shiny as my new stock pot.
Just need to run a beed of silicon around the base plate and Pot to seal it all up or when the filter has been changed.
Pot $20
3" pipe section $3.50
and some silicon
Cheers
Eric
This week I bought a large stock pot from Kmart about 29cm
Cut a hole in the lid to make the air intake base. Cut a hole on the bottom of the pot to match the plate that normally sits on top of the air filter. Then cut the pot hight down to fit together when bolted up.
Cut a 3" hole and attached a Galvanized section of pipe used for guttering and screwed and siliconed it in.
Now Im all ready to attached a 3" pipe to it which will run to the snokel when I get around to that
Im thinking 3" stainless pipe for snorkel, although it wont be a shiny as my new stock pot. Just need to run a beed of silicon around the base plate and Pot to seal it all up or when the filter has been changed.
Pot $20
3" pipe section $3.50
and some silicon
Cheers
Eric
You do not have the required permissions to view the files attached to this post.
2000 GU II 4.2TD
Who is online
Users browsing this forum: No registered users and 4 guests