Page 2 of 2

Posted: Thu Feb 11, 2010 10:05 pm
by known 2
3spd auto's with 4cyl motors? and is that the front diff or rear.

Posted: Thu Feb 11, 2010 10:31 pm
by Drew
The 4.1 maruti gears from the 90's wide track 1L maruti's are definately 1.3 centres & do bolt straight in & 1.3 aftermarket lockers fit.

Posted: Thu Feb 11, 2010 11:08 pm
by mnemonix
Drew wrote:The 4.1 maruti gears from the 90's wide track 1L maruti's are definately 1.3 centres & do bolt straight in & 1.3 aftermarket lockers fit.
Agreed. 45/11 ratio (4.09:1).
They are definately a direct swap for jimny auto rear centres (although the pinion flange bolts have different centres).

Re: Diff ratio's?

Posted: Sun Sep 05, 2010 10:32 pm
by luxorr
Just wondering if there is any difference :D In the 1.0L NT centres and the 1.3L NT centres?

Re:

Posted: Mon Sep 06, 2010 8:29 am
by CTZOOK
known 2 wrote:3spd auto's with 4cyl motors? and is that the front diff or rear.
yeh get the ring & pinion from the front diff

Re: Diff ratio's?

Posted: Mon Sep 06, 2010 8:33 am
by CTZOOK
I was running 1.6 efi, auto, 6.5 t/fer gears goin to 4.6 diff gears made it so much better on 34's found I wasn't using low range as much off road, on road speedo was nearly spot on

Re:

Posted: Mon Sep 06, 2010 6:34 pm
by Remydog05
Gwagensteve wrote:3 speed auto vitaras seem to be everywhere in pull-it-yourself wreckers down here in Vic, and the diffs seem to hang around for a little while to.

Steve.

If you see some let me know Ive missed out about 5 times in the past 3 months!
Cant find them anywhere in the recent past.