Page 2 of 2
Posted: Wed Jun 15, 2005 6:15 pm
by Gutless
Vit 2.5 V6 is a H25A. It runs the same gearbox as the 2.7 V6 H27A, and they are a LOOOOOONG gearbox. Also has a married transfercase, so you would want to be starting with a LWB zook with plans to stretch it.
Half cut ( if you can get one) would prolly fetch over $3k
Posted: Wed Jun 15, 2005 6:25 pm
by munga
1.6 tuned for torque with a little turbo ...
Posted: Wed Jun 15, 2005 6:29 pm
by hypo
Gutless wrote:Vit 2.5 V6 is a H25A. It runs the same gearbox as the 2.7 V6 H27A, and they are a LOOOOOONG gearbox. Also has a married transfercase, so you would want to be starting with a LWB zook with plans to stretch it.
Half cut ( if you can get one) would prolly fetch over $3k
r ok, well maybe ill choose sumthing else :(
Posted: Wed Jun 15, 2005 6:56 pm
by Gutless
Whats wrong with a 1600 EFI swap?
Posted: Wed Jun 15, 2005 7:05 pm
by redzook
Gutless wrote:Whats wrong with a 1600 EFI swap?
it dosent have enough BLING for hypo
Posted: Wed Jun 15, 2005 7:10 pm
by mud4b
Gutless wrote:Whats wrong with a 1600 EFI swap?
its getting too expensive for the power gain...
i cant find a vit v6 frontcut for under $3500..
and that is when i can find em...
Posted: Wed Jun 15, 2005 7:23 pm
by Gutless
I have fitted a baleno 1600 ( G16B) for under $1500. Thats for 2001 motor with 27000 kms, loom and ecu, all steel etc, and extractors. I already had a fuel pump.
Not that dear....
Posted: Wed Jun 15, 2005 7:29 pm
by hypo
1600 sounds good hey, they got anymore go than a 1.6 vit donk or r they the same thing
Posted: Wed Jun 15, 2005 7:48 pm
by mud4b
Gutless wrote:I have fitted a baleno 1600 ( G16B) for under $1500. Thats for 2001 motor with 27000 kms, loom and ecu, all steel etc, and extractors. I already had a fuel pump.
Not that dear....
that is a good price, but you know you cant get em for that every time...
Posted: Wed Jun 15, 2005 7:49 pm
by Gutless
They are the same output, just have coilpack ignition instead of distributor. Water outlets are in slightly different locations, but I can show you the tricks there if you need me t.
dearest quote I got on a baleno 1600 was $1500 for engine and loom/ecu. Might sound righ but don't forget this motor is 3-5 years old. not 6-8 like most vitara front cuts