Outer Limits 4x4 Board

Posted: **Thu Sep 15, 2005 3:42 am**

Call the guys at OTT in Canada. They're stand up guys.

http://www.ottindustries.com/

Posted: **Thu Sep 15, 2005 9:49 pm**

I should try calling them, coz I actually emailed them first, but got no reply.

Posted: **Fri Sep 16, 2005 6:44 am**

just rememeber that we're a bunch of hours behind you here in Canada.

Posted: **Fri Sep 16, 2005 2:39 pm**

Diesel28,

Did you call Sky? Whats the go? ...

Damn all this waiting

Posted: **Fri Sep 16, 2005 6:01 pm**

whiteknight wrote:Diesel28,

Did you call Sky? Whats the go? ...

Damn all this waiting

Yeah its getting old. I sent an email to OTT to see what the go is there. Otherwise I might go the LAB route. Might be worth paing the premium to get around the waiting with my thumb in a naughty place.

Posted: **Sat Sep 17, 2005 12:17 am**

and after all the stuffing around and email and phone calls u could have just bought a set locally and hed em weeks ago (well not if ur buying from snake racing)

Posted: **Sat Sep 17, 2005 9:03 am**

spazbot wrote:and after all the stuffing around and email and phone calls u could have just bought a set locally and hed em weeks ago (well not if ur buying from snake racing)

Can't say I like buying outside of australia but saving $400 is saving $400. Even with all the time and stuffing about I'd still rather go this route. Mind you I could be eating my words when in 6 weeks time when I bight the bullet and buy local.

Posted: **Sat Sep 17, 2005 11:56 am**

i can agree with a $400 saving but what happens when the arms arnt right the first time cuase they arnt used to making ones for left hand drive, and then you gotta send em back or pony up more $$ for a shop locally to have a look and try and fix em

Posted: **Sat Sep 17, 2005 6:09 pm**

I'm quite surprised that you haven't heard back from the ott guys lately. I've seen them posting up on other boards. . . Could your e-mail messages look like "nigerian scam" type messages???

try them again. i talked to them for almost an hour a few weeks ago about something that i never even suggested buying. Just talking shop. . . .

Posted: **Tue Sep 20, 2005 9:12 am**

biff wrote:I'm quite surprised that you haven't heard back from the ott guys lately. I've seen them posting up on other boards. . . Could your e-mail messages look like "nigerian scam" type messages???

try them again. i talked to them for almost an hour a few weeks ago about something that i never even suggested buying. Just talking shop. . . .

Yep, I sent one on last Thursday and haven't heard anything back. It shouldn't be coming up as spam as its my work email.

Posted: **Tue Sep 20, 2005 4:50 pm**

I also sent them one last week but no reply yet ..

Posted: **Wed Sep 21, 2005 2:50 pm**

Sky wrote:We're still waiting on Material....Steel crunch in the US is a pain in the butt, basically we have to wait for a steel mill to make it, then we hope we have a bid in thats high enough on it to purchase it. Rumor is there is more being produced in Maine right now so we will hopefully hear something soon.

Sky.

Got this back this morning

Posted: **Sat Oct 08, 2005 7:57 am**

Got another reply from Sky:

I need to check in on these, thanks for reminding me. I know material came in, but we got super busy a few weeks back and the guys may not have started any new projects.
Sky.

Hopefully wont be too much longer or I will just settle for crossover..

Posted: **Sat Oct 08, 2005 8:39 am**

whiteknight wrote:Got another reply from Sky:

I need to check in on these, thanks for reminding me. I know material came in, but we got super busy a few weeks back and the guys may not have started any new projects.
Sky.

Hopefully wont be too much longer or I will just settle for crossover..

Same, I'm just gonna get kit from ORI.

Posted: **Sat Oct 08, 2005 5:55 pm**

whiteknight wrote:Got another reply from Sky:

I need to check in on these, thanks for reminding me. I know material came in, but we got super busy a few weeks back and the guys may not have started any new projects.
Sky.

Hopefully wont be too much longer or I will just settle for crossover..

Its starting to sound like plain old excuses now. That last email I got couldn't be much more than a week ago and he said the only problem was the materials. Now he's saying the material is there but the problem is workload?

Posted: **Tue Oct 11, 2005 10:29 pm**

I have now rounded it down to this.........no more bullshit from the USA guys, im gonna get Aussie stuff.....at the moment looking at stuff from Superior Engineering and ORI.

New dilemma though is this........Do i go Hi steer or do i go double arm x/over? Someone told me recently that the double arm x/o will give me a better feel to my steering, but i cant see how Hi steer would be much different really

can anyone else enlighten me

Craig

Posted: **Fri Oct 14, 2005 1:24 pm**

I run the hysteer setup like OTT has. very good bump steer. Go Hydro assist, you won't regret it.

like this:

Posted: **Fri Oct 14, 2005 2:20 pm**

Is that setup you have registerable or what?

Looks tops and all but I need to drive mine around too

Posted: **Sat Oct 15, 2005 2:06 am**

In Canada, i might have problems with a Vehicle Inspection, but only with the suspension part and bumper height. Steering is Ok here as long as it's not a heim or rod-end style. Those are 1 ton off-the-shelf TREs.

Posted: **Sat Oct 15, 2005 6:32 am**

biff wrote:I run the hysteer setup like OTT has. very good bump steer. Go Hydro assist, you won't regret it.

like this:

very good bump steer?

u have a tri 4 ling and have a draglink
im guessing u have heeps of bump steer

Posted: **Sat Oct 15, 2005 7:38 am**

There's virtually no bump steer at all. it's a true 4 link. 39 degrees separation on the upper link angle (optimum 41+) degrees

Posted: **Sat Oct 15, 2005 8:39 am**

diesel028 wrote:I have now rounded it down to this.........no more bullshit from the USA guys, im gonna get Aussie stuff.....at the moment looking at stuff from Superior Engineering and ORI.

New dilemma though is this........Do i go Hi steer or do i go double arm x/over? Someone told me recently that the double arm x/o will give me a better feel to my steering, but i cant see how Hi steer would be much different really can anyone else enlighten me

Craig

go the hi steer over the double cross over., more clearance, stronger arms.

i had the snake hi steer on my old lux and it was sweet!

Posted: **Sun Oct 16, 2005 7:55 pm**

i know Highsteer is better and stronger but does highsteer and crossover both drive the same on the road? or is one still better than the other?

Posted: **Tue Oct 25, 2005 2:38 am**

Well I've just ordered my Snake Racing Hi Steer stuff and various other bits and pieces from them.

Posted: **Tue Oct 25, 2005 5:03 pm**

I am just about to give up..

Where is the cheapest place to get the crossover double steering arm?

Superior only do the welded jobby and not sure i want to go down that road, while ORI do the cast but at $460 + postage think its a little steep.

Anyone else do the double steering arms?

Posted: **Thu Nov 03, 2005 8:31 pm**

diesel028 wrote:Well I've just ordered my Snake Racing Hi Steer stuff and various other bits and pieces from them.

I posted that on the 25th of October....ordered over the net, phoned them the day after to pay by credit card....someone answers and says "they are too busy right now, can we call you back on this number"....."yep cool" i reply..........still waiting for call (9 days later). Nice way to treat someone who has a $2000+ order waiting to pay for

But not waiting any longer, Ive been elsewhere and ordered my Hi Steer.

Posted: **Thu Nov 03, 2005 8:46 pm**

diesel028 wrote:
diesel028 wrote:Well I've just ordered my Snake Racing Hi Steer stuff and various other bits and pieces from them.
I posted that on the 25th of October....ordered over the net, phoned them the day after to pay by credit card....someone answers and says "they are too busy right now, can we call you back on this number"....."yep cool" i reply..........still waiting for call (9 days later). Nice way to treat someone who has a $2000+ order waiting to pay for

But not waiting any longer, Ive been elsewhere and ordered my Hi Steer.

ah another satisfied snail racing customer

Posted: **Thu Nov 03, 2005 8:48 pm**

spazbot wrote:
diesel028 wrote:
diesel028 wrote:Well I've just ordered my Snake Racing Hi Steer stuff and various other bits and pieces from them.
I posted that on the 25th of October....ordered over the net, phoned them the day after to pay by credit card....someone answers and says "they are too busy right now, can we call you back on this number"....."yep cool" i reply..........still waiting for call (9 days later). Nice way to treat someone who has a $2000+ order waiting to pay for

But not waiting any longer, Ive been elsewhere and ordered my Hi Steer.
ah another satisfied snail racing customer

They'll be getting their satisfaction courtesy call tomorrow morning

Posted: **Fri Nov 04, 2005 7:03 am**

Got an email from SKY yesterday saying the arms will be ready by the end of next week. They are making 10 pairs of arms on this run.

Bout time is all I can say..

Posted: **Mon Nov 14, 2005 9:11 pm**

Any more news on these.........I have already sorted out another kit, but am keen to see what happens with the Sky ones.

Outer Limits 4x4 Board

All Pro Offroad Hi steer