Page 2 of 4
Posted: Wed Oct 19, 2005 12:07 pm
by Barathrum
Yep. I want one. I've allready beefed up my current arms, but your cut out is much better setup than current one. PM me some details, or i'll give ya a call if thats easier.
Posted: Wed Oct 19, 2005 12:10 pm
by Drewfus
roc70y wrote:$35.00 each for the rings guys, cheap insurance for your transfer cases. Especially if you've just invested in gears etc.
Who wants one?
Chris
Book me up for 1......will PM you re payment....
Cheers,
Drewfus
Posted: Wed Oct 19, 2005 12:12 pm
by DeWsE
WA guys how about we get them all sent as one package...
So far it is Me, shane, whitvit, nicbeer... anyone else?
Under 20KG can be posted by auspost.
Posted: Wed Oct 19, 2005 12:29 pm
by nicbeer
Also bazzoked, drew, nathan, duncan?
Sounds ok.
Quick Q. How much fabbing and modding to fit into a stock case location...
cheers
Posted: Wed Oct 19, 2005 12:33 pm
by Roctoy
i will put this in the for sale section under drive train components so as not to upset any of the mods. 
Cheers Chris
Posted: Wed Oct 19, 2005 12:34 pm
by alien
if it beefs my stock box with my calmini gears in it - im down for one definitely!!!
Posted: Wed Oct 19, 2005 3:31 pm
by ZOOK60
put me down for one
Posted: Wed Oct 19, 2005 3:38 pm
by Roctoy
nicbeer wrote:
Quick Q. How much fabbing and modding to fit into a stock case location...
cheers
not sure, haven't seen a standard zook mount for ages.
Posted: Wed Oct 19, 2005 3:50 pm
by CHOPZUKI
put me down for one
Posted: Wed Oct 19, 2005 3:52 pm
by germo
I'll take one
Posted: Wed Oct 19, 2005 4:12 pm
by alien
hrmmm i hope it fits standard mounts =)
Posted: Wed Oct 19, 2005 4:54 pm
by redzook
pm'ed ya
Posted: Wed Oct 19, 2005 5:57 pm
by RB zook
ill have one
Posted: Wed Oct 19, 2005 10:23 pm
by hypo
pm'ed
Posted: Wed Oct 19, 2005 11:12 pm
by WHITVIT
bulk pack for us west aussies sounds good DeWsE,
Roc70y - any idea how much they weigh each?
Posted: Fri Oct 21, 2005 7:56 pm
by bazooked
i will be up 4 1 seeing my car is up in the air i might aswell do it now.
Posted: Fri Oct 21, 2005 9:00 pm
by Roctoy
this is still happening guys, i have been in Melbourne for the last 2 days.
I will finish drawing it all up on the weekend and post the design on monday for everyone's comment, before i cut them all out.
Chris
Posted: Mon Oct 31, 2005 9:20 am
by Roctoy
This is the design guys, just router cut out of 1.6mm aluminium to ensure the program is correct for the laser machine.
The end product will be 6mm steel.
They weigh 3kg each and will be posted from Taren Point NSW 2229
In the pics the ring is around 20mm wide, i will add another 5mm to the outer edge of the ring just for a bit of extra meat.
There is an egde at the top and one at the bottom that i have run parallel to the stock mounting surfaces to make it easier to mate these up to stock mounts.
Is there any feedback before i cut these out?
I'm doing a run of 20 this week and it will be first in best dressed with some coin.
Ring me on 0424 671 940 or email me at roctoy_fabrications@yahoo.com.au to get banking details.
If they prove popular i will do another run and keep them in stock.
Cheers Chris
Posted: Mon Oct 31, 2005 12:07 pm
by jeep97tj
looks very tidy to me, well done and thanks
Posted: Mon Oct 31, 2005 8:56 pm
by Roctoy
jeep97tj wrote:looks very tidy to me, well done and thanks
i will put a few aside to send to WA, get a group together for over there guys, youll save on postage.
Chris
Posted: Mon Oct 31, 2005 10:14 pm
by hypo
looking good man, ill still get 2 off ya, cheers
Posted: Mon Oct 31, 2005 11:43 pm
by WHITVIT
roc70y - you'll have to replace your prototype with one of these works of art. very professional looking.. why dont you paint them some bright colour and call them " THE MOST EAGERLY ANTICIPATED PRODUCT OF THE YEAR" then charge $100ea for them... After i get mine of course.
i'll send a few PM's to the Westys.
Posted: Tue Nov 01, 2005 8:08 am
by Roctoy
Posted: Tue Nov 01, 2005 10:13 am
by DeWsE
PM guys if you want to go in an order with me.
Cheers
Posted: Tue Nov 01, 2005 11:47 am
by alien
before i say 100% yes - will this beef up my tcase on a stock zuk running 5.14 calminis???
Posted: Tue Nov 01, 2005 11:59 am
by DeWsE
alien wrote:before i say 100% yes - will this beef up my tcase on a stock zuk running 5.14 calminis???
It only depends how you mount it. if you just bolt it on it's not going to do s**t, but if you make it part of your mounts then yes if should help hold it together.
Posted: Tue Nov 01, 2005 12:04 pm
by alien
so like on the first page, run 2 arms off it and bolt to the chassis???
Or better to run it elsewhere?
I just dont want to get one and then stuff it up through lack of knowledge =P
Dewse - how do i get money to you?
Posted: Tue Nov 01, 2005 12:05 pm
by Roctoy
alien wrote:before i say 100% yes - will this beef up my tcase on a stock zuk running 5.14 calminis???
what this ring is supposed to do is take some of the load on the casing from the 4 small bolts on each side and distribute it onto the all the bolts around the case, thus putting a small amount of load on each of the bolts instead of alot of load on 8 bolts.
it is up to the individual how they fix this ring to their stock mounts, it would require some welding.
There is no guarantee that this will make a zook t'case indestuctable, but it is definitely an improvement on the stock design.
Cheers Chris
Posted: Tue Nov 01, 2005 12:12 pm
by DeWsE
alien wrote:so like on the first page, run 2 arms off it and bolt to the chassis???
Or better to run it elsewhere?
I just dont want to get one and then stuff it up through lack of knowledge =P
Dewse - how do i get money to you?
Will work it out when I am ready to order.
most probably direct debt, or cash when you pick it up or I drop it off.
Posted: Wed Nov 02, 2005 10:57 am
by Roctoy
where's everyone gone?
i had at least 20 people pm me wanting these and now that it's a definite thing, you've all just dissapeared.
so far the people getting them are:
RedZook
HypoZook
and
Chopzuki
A1Mav
Bathrum
i'd like to have at least 10 people paid before i start chopping into a sheet!
Chris
