Snake Racing kit suspension kit

[Micka]

bent arms

Hey Cooter...

Those rear arms look like the could use some gussets in the angle for strength.

Are they stocko arms that you have made up or did you buy them?

That bright yellow should attract some attention

Micka

[cooter]

they are standard arms but we used a really good pipe bender as long as you dont kink them they will be strong and when u bend then go slow as possible

[cooter]

bent arms

That bright yellow should attract some attention

Micka

I think the tyres hanging out of the gaurds by 2 inches will attract more attention than the arms

[stuee]

Just browsing the snake website and they've finally got the dropped radius arms out (well at least there finally on the website anyway). Nice and cheap at $1400 too

http://www.snakeracing.com.au/newproducts.html

I guess they can't be to far off the finished kit now. They've got the radius arms, and panard rod and I think shock towers for the front. Wonder what they're gonna do for the rear a-frame?

[MJ]

I've got no idea what shipping would cost or what the exchange rate is; but you could try:-

I have the QT front arms myself and Devon 4X4 stuff is very good and they can arrange shipping.

Rear
http://www.devon4x4.com/shop.php?mode=p ... roduct=170

Or http://www.equipe4x4.com/inglese/ARTICO ... ING%20ARMS


Front
http://www.qtservices.co.uk/ Then click new products. They're not new just the website not updated.

Or http://www.equipe4x4.com/inglese/ARTICO ... ING%20ARMS

Mark

[Reddo]

Had the same dilema, and ended up slotting the holes in the flange joining the stubs to the diff housing proper and never looked back. Used a die grinder and slotted the holes approx 3mm. Have total of 2 inch sus lift and this totally cured the wanders. Now sits straight as a die at 130kph even on patchy pavement. I would recommend this a cost -effective solution

[Reddo]

....sorry meant rotated the swivels, not the stubs!

[Hally]

G'day Adam I to emailed snake racing about this kit they said they were testing them now (three moths ago) and will be released in 3-4 weeks (yeah I'm still waiting ) they do have the front arms At $1400 a pair for three inch or four inch lift. Desperate to get them the car been off the road for three months its on their web site.