Outer Limits 4x4 Board

Posted: **Thu Nov 10, 2005 7:48 pm**

i noticed that my front manual hubs are avm are these standard hubs or aftermarket. and what can i do for my truck to get better fuel economy and perhaps more power

Posted: **Sun Nov 13, 2005 5:37 pm**

All pajero's came out with auto locking hubs i believe, so yours will be aftermarket becuase the auto hubs were prone to wearing out and are expensive to fix.
If you want fuel economy dont get bigger tyres, dont get a suspension lift and dont get a body lift. You cant have everything, you need to decide what the car is used for most and what you want.
As for power no amount of money will justify the little power gain you could achieve but you could consider less restrictive induction and exhaust.

Posted: **Mon Nov 14, 2005 1:53 pm**

the tyres that i will be running will be for off road only so that i dont use more fuel every day. and i cant see how a 2in susp lift will increase fuel economy? does that mean if i lowered it like my old dunnydore then i will get better fuel economy

Posted: **Tue Dec 06, 2005 7:46 pm**

well any way, i got my new tyres today baja claws 33x12.5 on 15x10 black sunnies. cranked front torsion bars and i am picking up my rear spring tomorow. looks sick. i cant wait till the holidays. will post pics asap

Posted: **Wed Dec 07, 2005 3:43 pm**

Pics man, pics.

Another Paj is re-born.

Posted: **Sat Dec 10, 2005 9:28 am**

pics if they work

Posted: **Sat Dec 10, 2005 9:30 am**

Posted: **Sun Dec 11, 2005 2:46 pm**

are those claws brand new cos they allready look a lil worn, anyway tuff looking rig u will get alot of enjoyment out of it.

Posted: **Sun Dec 11, 2005 5:01 pm**

yea they are brand new, just dirty

Posted: **Tue Dec 13, 2005 7:08 am**

crikey ... our cars must be twins !!

except for the type of tyre damn theyre close and love the numberplate

NFI (NF Injected) or (No Fn Idea) .....

once i re weld my bashplate mount (squashed it) im ready for an outing ...wheres all this rain ???

Posted: **Tue Dec 13, 2005 8:18 am**

may be close but they dont rub (except a little on the rubber flares)

Posted: **Tue Dec 13, 2005 9:48 am**

Nice.

Posted: **Wed Dec 14, 2005 1:27 am**

im getting temted to buy a gen 1 and do some mods.
what are they like offroad compared to a gen 2?
from what i can gather they are easy to mod..

Posted: **Wed Dec 14, 2005 5:21 am**

haha... no uav....i meant close as in our two cars look very close

Posted: **Wed Dec 14, 2005 10:23 am**

Looks like a cruise up to gembrook is in order with a few Paj's like this in the vacinity.

Posted: **Wed Dec 14, 2005 4:00 pm**

sounds good, even tho i have been up there 3 outta last 4 days

Posted: **Wed Dec 14, 2005 10:18 pm**

So, Pajeros do Gembrook, when? Early next year ?

Sorry to hijack.

Posted: **Wed Dec 14, 2005 10:31 pm**

Yep sounds good. How about the 21st of Jan?

Meet in Gembrook town in front of the playground at 9am and then head into bunyip from there? We can go play on a few good tracks

Posted: **Fri Dec 16, 2005 5:31 am**

ill be playing a bit over chrissy period ..... i hope ! but the 21st of january sounds like a plan .......marking it on the calendar !!

bout time i met up with some OL people

Posted: **Fri Dec 16, 2005 8:17 am**

PajeroSRV wrote:Yep sounds good. How about the 21st of Jan?

Meet in Gembrook town in front of the playground at 9am and then head into bunyip from there? We can go play on a few good tracks

Sounds good, UAV you up for this, as we stole your thread?

Posted: **Fri Dec 16, 2005 12:03 pm**

j-top paj wrote:im getting temted to buy a gen 1 and do some mods.
what are they like offroad compared to a gen 2?
from what i can gather they are easy to mod..

i think its more they are relatively cheap these days, and if your prepared to do the mods yourself - yes cheap to mod. I like the square old look and dont mind when putting a new dent in the side or having to bash the rear bar with my BF sledge hammer to open the rear door

if i had anything newer/dearer/nicer i probably would be a biatch out driving !

Posted: **Fri Dec 16, 2005 12:19 pm**

Yo i'd be up for a gembrook with you fellas, thats if you would let a toyota tag along.

BTW, im a mate of corkhead's

Posted: **Fri Dec 16, 2005 3:12 pm**

chopchop wrote:Yo i'd be up for a gembrook with you fellas, thats if you would let a toyota tag along.

BTW, im a mate of corkhead's

Chopchop

I'll think you'll find Paj drivers are quite a friendly and sociable lot, and would be more than happy to have a Toyota along.

As long as you can keep up.

Scott

Posted: **Fri Dec 16, 2005 6:14 pm**

Yeah for sure, some along. I'll have a couple of yota's with me too probably.

Bloody surfs.

Posted: **Fri Dec 16, 2005 9:28 pm**

did the v6 come out in swb?
i dont think ive seen any around

Posted: **Sat Dec 17, 2005 1:49 pm**

yea i should be able to make it out then if im not back at work, but wont find out till closer to the date

Posted: **Sun Dec 18, 2005 7:08 am**

My SWB Nf is v6 with coils not sure if you guys ever got them in oz

Posted: **Sun Dec 18, 2005 2:23 pm**

1hzzzz wrote:Getting back to the cheep spring thing, I have done what was sugested on the Americam 4xwire sit re latter model Paj springs (I used 1996) in my Gen1 and got 2" lift SWB, if what you read in the forum is correct re coil spacers from the GQ you should be able to get the same lift for your LWB and on the cheep.
I picked up the springs for $30 each from the wreckers they are genuine paj springs (no probs with insurance) and are progressive to boot. They give a great ride, I also picked up some arb shocks (front and rear) from a Gen1 at the same time from the same wrecker, must be lucky some times....

Heyhey, whaddya mean "american 4x4wire"? Heheh.. a Canadian wrote most of that drivel...

Glad they worked for ya! The ride improvement over the stockers was as big of an improvement as the lift...

PHIL

Posted: **Mon Dec 19, 2005 6:29 pm**

well seeing as this is a thred on my truck i suppose i should let everyone no that i made a snorkel for the truck at a total cost of $25 using unslotted aggie pipe and bits and pieces will post pics asap

Posted: **Thu Jan 19, 2006 9:45 am**

cool... looking forward 2 the pics of the snorkel!

cheers

Outer Limits 4x4 Board

Truck build up! new drawers nearly finished

Hubs and economy

new