Outer Limits 4x4 Board

Posted: **Wed Jan 25, 2006 6:23 pm**

Gonzo's secretly been using this stuff

http://www.sprayonmud.com/

Posted: **Wed Jan 25, 2006 9:49 pm**

Hello
Look at this. It is imposible to drive offroad in our country(180 cm of snow). The temperature is 23 degrees C below zero.

Posted: **Wed Jan 25, 2006 9:54 pm**

nebivedu wrote:Hello
Look at this. It is imposible to drive offroad in our country. The temperature is 23 degrees C below zero.

, bet the skiing/snowboarding is good though

...38" Centipedes will take your rocky through the snow though

Posted: **Thu Jan 26, 2006 12:09 am**

RockyF70 wrote:
nebivedu wrote:Hello
Look at this. It is imposible to drive offroad in our country. The temperature is 23 degrees C below zero.
, bet the skiing/snowboarding is good though ...38" Centipedes will take your rocky through the snow though

My feroza have 30" BFG all terrain, but it is not enough. Soo it is great time to try our small vehicle - ARGO. I do not have pictures of argo yet, but for representation ...

http://www.argoatv.com

Posted: **Thu Jan 26, 2006 12:44 pm**

Madness!

GO ARGO!

Posted: **Thu Jan 26, 2006 4:00 pm**

HotFourOk wrote: Madness!

GO ARGO!

Argo get f@#$%#

Posted: **Wed Mar 29, 2006 4:25 pm**

got bored so heres some pics from the back yard

Posted: **Wed Mar 29, 2006 6:59 pm**

You put it in 4LO to drive on the grass and get up there didnt you..

Go up to the next level of bricks man

Lookin good...

Posted: **Wed Mar 29, 2006 7:40 pm**

It would have been funny if you'd taken the brickwork out trying to climb it! Gamer than me.

Posted: **Wed Mar 29, 2006 7:44 pm**

HotFourOk wrote:You put it in 4LO to drive on the grass and get up there didnt you..

Go up to the next level of bricks man

Lookin good...

so wat if i did

i still got a little bit left i think.
i hit it head on and started hackin so i hit it side ways so makin the turn to the next bricks maybe difficult....but i give into peer pressure real easy so il try it next time the folks are out.

i did chip the bricks a little but u wont see it unless ur lookin for it.

Posted: **Wed Mar 29, 2006 7:49 pm**

and plus the last time i drove up the stairs was when i was testin to see if 4wd was workin (it wasnt) so there was 2 nice big holes left in the ground below the steps.....folks not to happy about that.

Posted: **Wed Mar 29, 2006 8:35 pm**

got a couple i posted up elsewhere

Posted: **Thu Mar 30, 2006 5:03 pm**

pfft got nothin mull check out todays pics

Posted: **Thu Mar 30, 2006 5:04 pm**

more

and check out the damage

Posted: **Thu Mar 30, 2006 5:07 pm**

COVER UP!!!!

Posted: **Thu Mar 30, 2006 5:47 pm**

Surprise, surprise, some bricks gave way!

Posted: **Thu Mar 30, 2006 6:45 pm**

yeah the one at the front split in half. they are old and crappy il sit on them later and go ohhh jeez dad these bricks just broke

Posted: **Tue Apr 04, 2006 6:04 pm**

This is my stock f-300 setup...only changes are monroe gas all round. and i removed the sway bar.

quite reasonable

Posted: **Sun Apr 09, 2006 10:56 pm**

this is a few from ormeau

Posted: **Sun Apr 09, 2006 11:06 pm**

more from ormeau

Posted: **Mon Apr 10, 2006 6:10 am**

My running gear mods are: Sway Bar removal, 31x10.5x15 Colway MT's, 2" lift shackles, Shaved bumpstops and torsion bars wound up.
Needs work, but that is all in hand.

Mac.

Posted: **Tue Apr 11, 2006 5:00 am**

Hey Mantamac, do your front tyres scrub on the guards at all with the 31's?

Truck is looking nice, only thing I'd be doing is looking for some longer rear shocks, coz I think you'll find yours are limited your down-travel quite a bit.

Posted: **Tue Apr 11, 2006 6:40 am**

The 31's fouled the inner mud-flap mountings at full lock. They just needed bending out of the way. They also fouled the lower front pannel at full compression. That was just 'tweaked' with a soft faced hammer. I now have no rubbing at all, and without the need for a body-lift.

I was intending to link the rear end, but as I'm doing that to my other Sportrak anyway I have decided to see how much I can mod the leaf spring suspension. I am making a new crossmember so that I can fit longer travel shocks for more droop without spoiling the crowd, as that is fine. I want to make some folding shackles to help exploit the shock travel and if I feel really brave, I might make up some 'Z' Boxes for the rear spring front mounting.
I'm pulling the front diff out of the other car this weekend and welding it up and fitting it to the above car. That should get it a little further until the rear is sorted out.

Mac.

Posted: **Fri Apr 14, 2006 3:12 pm**

here's a couple from ormeau

Posted: **Fri Apr 14, 2006 4:11 pm**

Damn, red squares dude.

Posted: **Tue Apr 18, 2006 8:44 pm**

heres a couple from the weekend at LCMP

Posted: **Tue Apr 18, 2006 8:47 pm**

Nice

When did mull cut the rear off his Rocky? Looks mad

Posted: **Tue Apr 18, 2006 8:55 pm**

here's my best
check the flex or lack there of

Posted: **Tue Apr 18, 2006 9:07 pm**

HotFourOk wrote:Nice

When did mull cut the rear off his Rocky? Looks mad

we 'finished' it thursday nite i think he did a lot more after i left and then early the next mornin...cant wait til he gets McCracken on the tray.

fine mull heres a plug for ur rig:
http://www.outerlimits4x4.com/PHP_Modul ... hp?t=37320

check it y'all

Posted: **Tue Apr 18, 2006 10:25 pm**

sorry last post did not turn out, still not working anyone care to let me know how to fix it

Outer Limits 4x4 Board

Post Your Flex Pics

Stock setup

this is mine

few more