Yes you can buy one in either cast or fabricated steel respectively from MTQ and from Beaudesert exhausts and in conjunction with a 3" exhaust will help your problem but not completely cure it. Speaking from experience these turbos need hi-flowing before the EGTs will drop and the turbo performs to its best. Do not waste money on 2,1/2" exhaust systems on TD42 engines, 3" should be a minimum.BIG ZETOR wrote:can you buy a 2 1/2 to 3 inch dump for this turbo anywhere or would you have to make one yourself it is a factory water cooled one.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
turbo exhaust heat
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Custom Barwork
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Cages built to CCDA specs
Turbo and intercooler systems for diesel and petrol.......PM me.
Centavic Performance 4WD
Who is online
Users browsing this forum: No registered users and 0 guests