You noticed it bouncing around and you didn't tell me!! I could hear this rattle all night just ignored it thinking it was the springs. On the way home the exhaust started getting noisy and it eneded up 2 of the 3 rear mounts had busted and the entire exhasut was only held on at the Y pipe.I notice it bouncing around
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Range Rover Springs & shocks
Moderator: Micka
Thanks,
Adam
Adam
Exhaust wise I wouldn't go any bigger than 2.5 inch - the only reason to run 3 inch is in boosted applications i reckon, anything else 2.5 is usually more than adequate, with a decent low restriction muffler.
I've broken the same exhaust mount twice, and fixed it with a coathanger both times.... its still held up by the coathanger
I've broken the same exhaust mount twice, and fixed it with a coathanger both times.... its still held up by the coathanger
84 Rangie, 3 inch spring lift, 2 inch body, Megasquirted 4.6, R380, rear Maxi, 34x11.5 JT2s. Simex FM installed.
Who is online
Users browsing this forum: No registered users and 7 guests