Frontera snorkel

Post by **jacka** » Sun Feb 01, 2004 5:22 am

No, i owned a 97 Frontera with bodylift, OME susp, 31" muds and a motor that i threw more dollars at that i care to remember!

Post by **Bacdef** » Mon Feb 02, 2004 10:03 pm

jacka what brand snorkel and was it hard to fit

Post by **jacka** » Tue Feb 03, 2004 6:10 am

snorkel was a safari and there was a bit of stuffing around but is come up quite good.

Post by **tonyw** » Fri Feb 06, 2004 5:48 am

I was looking for a snorkel for my SWB, as no one listed for the frontera/amigo/mu, I bit the bullet and ordered a Safari 100HF.

Its not a perfect fit, as the rodeo arch flare isn't as big, but it fits ok.

If I was going to do it again though I think i would re-shape the wing to let the bottom of the snorkel sit more towards the centre of the vehicle.

The intructions that come with the snorkel work ok, apart from the hole for the inner wing. Its easy enough to work out where to put it though.

Any Questions?

Post by **Westoztroopa** » Sat Feb 07, 2004 2:04 am

Not pretty, but looks like it works real well. Good stuff! :cool:

Noel

Post by **tonyw** » Tue Feb 17, 2004 3:12 am

Just a quick tip, when you fit a snorkel to a Mu/Frontera, stick the gear lever gaiter down with plenty of sealant. I got stuck in some deepish water at the weekend (Half way up the doors) I was ok till the Landrover behind me came in to give me a pull. The pressure from his bow wave popped the gaiter. Two seconds later I was full to the bottom of the CD player

Before the gaiter popped I only had a slight weep from the passenger door seal

Post by **Westoztroopa** » Wed Feb 18, 2004 10:11 pm

News on a snorkel for a MU. Dont know if this is relevant to Frontera owners...
http://harbourcitynet.co.nz/forums/Club_Isuzu/posts/6058.html

Noel

Outer Limits 4x4 Board

Frontera snorkel

snorkel

snorkel

Who is online