Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
ROCKY-LEXUS V8+AUTO-MQ TRANSFER-TOYO 60 DIFFS
Moderator: Tiny
damm that looks sweet!!! ... why didnt Daiahatsu do that in the beginning?? would have saved us all a lot of work
nothing but nothing (except just maybe a Merlin 60 powered spitfire) sounds as good as those Lexus V8's at full noise.
nothing but nothing (except just maybe a Merlin 60 powered spitfire) sounds as good as those Lexus V8's at full noise.
_________________
1988 LWB ,IFS, LSD, POS, PAJ, 31" M/T's on bling rims, Snorkel, 2" Lift ,new shocks ,XD9000 winch
1988 LWB ,IFS, LSD, POS, PAJ, 31" M/T's on bling rims, Snorkel, 2" Lift ,new shocks ,XD9000 winch
ok....my new shed is up........and the vehicle is at my place now.
the rocky has brakes and we are at the stage of plumbing the engine up to the radiator and heater, then we will do the wiring. not far to go now. i have also moved the airbox to a better spot and removed some of the piping.
the interior is just about done too, looks nice and factory.
the rocky has brakes and we are at the stage of plumbing the engine up to the radiator and heater, then we will do the wiring. not far to go now. i have also moved the airbox to a better spot and removed some of the piping.
the interior is just about done too, looks nice and factory.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
meece4x4 wrote:damm that looks sweet!!! ... why didnt Daiahatsu do that in the beginning?? would have saved us all a lot of work
nothing but nothing (except just maybe a Merlin 60 powered spitfire) sounds as good as those Lexus V8's at full noise.
ohhh.....i like the way you think!
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
nah, they are full width. we have some late model rocky flares still to go on.mid9-5's wrote:hey mate did u cut down the 60's diffs because i know u have flairs on but it dosnt look like the wheels sit out very far from the guards at all?
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
joeblow wrote:
You might wont to get a bigger radiator, i can see this over heating...
considering the stock radiator is almost twice the size....
Tow rig
[url=http://www.4wdmonthly.com.au/shed/index.php?id=644&im=1]COILYLUX[/url]
Comp buggy
[url=http://www.4wdmonthly.com.au/shed/index.php?id=1529&im=1]ROCTOY[/url]
[url=http://www.4wdmonthly.com.au/shed/index.php?id=644&im=1]COILYLUX[/url]
Comp buggy
[url=http://www.4wdmonthly.com.au/shed/index.php?id=1529&im=1]ROCTOY[/url]
the stock rad is twice the size because of all the crap infront of it. we have done testing and so far the temp is constant. even after hard revving it comes back down to acceptable levels.coilylux wrote:joeblow wrote:
You might wont to get a bigger radiator, i can see this over heating...
considering the stock radiator is almost twice the size....
the interior is almost done and she drives. just gotta fit the diff gears and lockers and start the approval process.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Re: ROCKY-LEXUS V8+AUTO-MQ TRANSFER-TOYO 60 DIFFS
did you get the nod for your mods??
Re: ROCKY-LEXUS V8+AUTO-MQ TRANSFER-TOYO 60 DIFFS
bumpaty bumpShambles wrote:did you get the nod for your mods??
Re: ROCKY-LEXUS V8+AUTO-MQ TRANSFER-TOYO 60 DIFFS
just PM Joe directly......
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Who is online
Users browsing this forum: No registered users and 2 guests