Weld on Beadlocks

Post by **Roctoy** » Mon Jul 10, 2006 9:46 pm

not not wrote:I spose you need all the help ya can get with the maxxis double back at ya!

watch those sidewalls Jamie

Post by **playtime 4x4** » Mon Jul 10, 2006 10:26 pm

Chris, does the outer edge of the lock ring have a bevel or radius or is it square off the laser? Hanging out for the pricing as quite a few of my customers are really keen to get them.
Dave @ Play Time 4x4

Post by **Roctoy** » Mon Jul 10, 2006 10:35 pm

they just come square cut from the laser, I ran around mine a few times with the grinder just to knock the corner off them.

Chris

Post by **sierrajim** » Tue Jul 11, 2006 10:18 am

Would it be possible to weld the alloy rings to a cast alloy rim? or would you need to use a machined alloy rim?

Post by **oozuk** » Tue Jul 11, 2006 4:55 pm

REALLY intrested in a set of those weld in beadlocks rocktoy, suit 15" x 4
got a price yet??

Post by **not not** » Tue Jul 11, 2006 10:31 pm

yeah chris get ya act together and service theses people. They are practically throwing money at ya !!!!

Hows those four grab ya? Side walls mate I run mickeys so i dont have probs like that.
And yes it has taken me a whole day to think of a comeback

Post by **crankycruiser** » Tue Jul 11, 2006 10:35 pm

Heres my set of beadlocks rims that we jsut finsihed fixing up..

They owe me $640.. not bad for a set of 16x10s

Post by **playtime 4x4** » Wed Jul 12, 2006 9:07 pm

[quote="not not"]yeah chris get ya act together and service theses people. They are practically throwing money at ya !!!!

Hows those four grab ya? Side walls mate I run mickeys so i dont have probs like that.
[size=7][/size]And yes it has taken me a whole day to think of a comeback[/quote]
Yeah c'mon chris, give us prices

Post by **Roctoy** » Wed Jul 12, 2006 9:36 pm

Sorry for the delay in getting prices up people, we have had a few really hectic days at work this week and it hasn't been the top priority. I will do must best to have all the prices up here tommorow night.

I am very enthusiastic about the response to this and i'm keen to get this all happening.

Will post up tommorow.

Cheers Chris

Post by **Roctoy** » Thu Jul 13, 2006 8:53 pm

ok finally got the prices sorted see the add in the wheels and tyres section

http://www.outerlimits4x4.com/PHP_Modul ... 297#849297

Chris

Post by **not not** » Fri Jul 14, 2006 12:40 am

Bout time slapper

Post by **Stew77** » Sat Jul 15, 2006 4:49 pm

Roctoy Designfab wrote:
not not wrote:I spose you need all the help ya can get with the maxxis double back at ya!
watch those sidewalls Jamie

He he!

Post by A1 » Wed Jul 19, 2006 4:27 pm

More weld on Beadlocks

Outer Limits 4x4 Board

Weld on Beadlocks

Bead locks

beadlocks

Who is online