ya the gen 1there's just something about the boxy Gen Is. I have a thing for vehicles with angles
all the best with your car and enjoy all the comfy bits
Moderator: -Scott-
10 bolts for the diff.NJV6 wrote:Yea, you'll prob need 16 inch rims to fit the disc's is that right?
Count the bolts and what size around the rear diff head.
my GUBanzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
Buddy, I paid 7k to my door, and that's with $500 shipping from Van to here. This was for an auction grade 4, with 35ooo kms on it, and it needed nothing except tires to pass inspection.Clead wrote:Well guys, I had the 1990 turbo-diesel Exceed model checked out at a JDM-specialty shop, and it's gonna cost a small fortune to get it 100%. Needs: all balljoints, all tie-rod ends, 4 shocks, 4 tires, front calipers, rear rotors, timing belt/water pump/gaskets, some hoses are cracking, and all brake pads are kaput. Total estimate $3500-4000 labour-in. Considering the guys is asking $7000, it's simply not worth it. I've spoken to him since the inspection, and he's offered to come down to $6500 Canadian. Unless he'll go under $5000, or catch up on some of that maintenance himself, I'm going to have to pass this one by. Too bad. I really did like this particular model, and they're rather few and far between here in Canada. I've never seen an Exceed for less than $10,000.
Users browsing this forum: No registered users and 15 guests