Posted: Sun Nov 12, 2006 3:44 pm
i've done the same as Andrew. if anyone wants help on which wires to hook up let me know
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
1991 80 series GXL central locking
Page 2 of 2
Posted: Tue Nov 14, 2006 2:20 pm
sounds like a good thing, might see yota up here see how much....
Posted: Wed Nov 15, 2006 9:07 pm
You can get a wireless receiver + 2 keyfobs from Jaycar Electronics for under $80.
Hookup is pretty simple, postive, negative, then work out which two wires are controlling your doors. Tap into those and presto, wireless central locking
My 91 80series already had an actuator in the drivers door. I have an unlock/lock button near the power window controls on the drivers side. This is an electronic control, hence, there is an actuator in the drivers door.
Hookup is pretty simple, postive, negative, then work out which two wires are controlling your doors. Tap into those and presto, wireless central locking
My 91 80series already had an actuator in the drivers door. I have an unlock/lock button near the power window controls on the drivers side. This is an electronic control, hence, there is an actuator in the drivers door.
Posted: Tue Feb 13, 2007 8:18 pm
Update - for anyone who cares.
alam/imobiliser is in. girly beep when you turn it op, much girlier high pitched chirping when t goes off but you get that
less smurfy (or is that much smurfier) remote & no wood grain
brother took time to put it in due to deciding the bullbar needed to be polished (why i don't know)
i think it was a little hard to find a place to put the alarm box but once he did it was apprently easier.
Don't know if he is able to do more Instals but it anyone is still interested give me a hoy hoy and i will see if there anything that can be done for a group lot/cheap deal for genuine yota alarm & imobilser for your truck.
Attched is pick of remote & non yota key
alam/imobiliser is in. girly beep when you turn it op, much girlier high pitched chirping when t goes off but you get that
less smurfy (or is that much smurfier) remote & no wood grain
brother took time to put it in due to deciding the bullbar needed to be polished (why i don't know)
i think it was a little hard to find a place to put the alarm box but once he did it was apprently easier.
Don't know if he is able to do more Instals but it anyone is still interested give me a hoy hoy and i will see if there anything that can be done for a group lot/cheap deal for genuine yota alarm & imobilser for your truck.
Attched is pick of remote & non yota key