Page 2 of 3
Posted: Mon Nov 10, 2003 2:04 pm
by 308LUX
removed leaf springs front & rear, more flex
about to start IFS rears in rear
saving for shocks (going bilstiens)
Posted: Mon Nov 10, 2003 2:27 pm
by XXXL80
turbo charger & double air lockers & 4:88 diff ratios.
bank account is now empty
next purchase will be a set of 36 inch swampers and then thats it (for a while)
Posted: Mon Nov 10, 2003 2:44 pm
by DaveS3
new seats!!!! thank god for that!!
Bigger tyres
Posted: Mon Nov 10, 2003 3:07 pm
by MY45
Added a big leaf to front suspension to counter Wrap......
Posted: Mon Nov 10, 2003 3:46 pm
by bundytunna
put a snorkel on
bout to put in body lift and susp lift
Posted: Mon Nov 10, 2003 3:56 pm
by Skegbudley
Raised front bash plate up 3" after droping off ledge onto big rock. (Rock won)
Bash plate also redesigned oil cooler so it now looks like a crinkle cut chip.
Posted: Mon Nov 10, 2003 4:05 pm
by redzook
welded rear, trackbar
Posted: Mon Nov 10, 2003 4:09 pm
by ozy1
Cut rear fibreglass flares to allow the 33s to articulate without rippin em off, people told me i could fit 35's without body lift but with 6" springs, well, ill get pics, it doesnt work,
ripped out interior, to seal the floor, found water seepin in through factory holes and underfelt ratshit, just finished painting floor with Sound deadner,
off to put interior back in.
Posted: Mon Nov 10, 2003 4:24 pm
by crispy
N*A*M wrote:stephen wrote:conveyor belt wheel arch flares to cover new simex.
pics?
of the flares or the simex's, lol
mine too was conveyor belt flares, is cheap, easy and works a treat. I'll post a pic of mine for ya nam
Posted: Mon Nov 10, 2003 5:20 pm
by Slunnie
Extended bump stops to stop my shockies crunching. Also stops my inner guards crunching.
Posted: Mon Nov 10, 2003 6:51 pm
by ORSM45
out with the 6 cyl and 4 spd, in with the 383 V8 and the 5 spd
Posted: Mon Nov 10, 2003 6:56 pm
by MissDrew
Air Conditioning
Posted: Mon Nov 10, 2003 7:27 pm
by RUFF
Cut 18" off the back of my hilux chassie
Posted: Mon Nov 10, 2003 7:27 pm
by robbie
greg wrote:robbie wrote:beat the shit out of my guards with an axe to make my simexes fit..
I've gone one better than this and beat my sills with a chunk of concrete so i could get the doors back on
nice
Posted: Mon Nov 10, 2003 7:31 pm
by mlowe76
home made bead locks...
Posted: Mon Nov 10, 2003 7:39 pm
by Bluey
fitted new suspension all round. parabolics and shocks werent too short like originals i had
Posted: Mon Nov 10, 2003 8:24 pm
by ORSM45
mlowe76 wrote:home made bead locks...
made on your computer?
Posted: Mon Nov 10, 2003 8:28 pm
by Area54
NERF roll bar
(you brissy boys will know what I'm talking about)
Posted: Mon Nov 10, 2003 8:47 pm
by thunder
rear air locker
Posted: Mon Nov 10, 2003 9:20 pm
by A1
Put my 37''s on then
Then took em back offfffffffffff
Posted: Mon Nov 10, 2003 9:26 pm
by big red
thick walled tailshaft due to buggering the standard one at mud bulls
Posted: Mon Nov 10, 2003 9:31 pm
by ShortyMQ
Removed turbo diesel & 5-speed and replaced with injected x-flow, C4 auto and cruiser transfer with crawler gears
Posted: Mon Nov 10, 2003 9:57 pm
by Screwy
Just put in 2 inch springs, extended shackles, and LSD rear into the MQ
Posted: Mon Nov 10, 2003 11:25 pm
by mlowe76
383FJ45 wrote:mlowe76 wrote:home made bead locks...
made on your computer?
Nope they are real.
Posted: Tue Nov 11, 2003 12:46 am
by beebee
Attempted to build side/scrub bars on Saturday. Pulled power steering pump on Sunday and adjusted pressure. Built a high energy ignition system tonight and will install tomorrow.
Posted: Tue Nov 11, 2003 3:06 am
by *BESTY*
My last modification was the rebuild !!
V6 Engine - Hilux Box, t-case, diffs, side bars, rear bar, 35 Simex's, fuel tank....... on the Feroza
last
Posted: Tue Nov 11, 2003 9:07 am
by Webbie
LOOKED at it and realized ive 9ot s#it loads of work left to do before its finised
Posted: Tue Nov 11, 2003 8:08 pm
by Kev80
Welded up some new steel bash plates & sill rails for my Cruiser, which i managed to bend the T/case one the first weekend out afterwards !
Posted: Tue Nov 11, 2003 8:13 pm
by Mad Cruiser
Gearbox Rebuild, still doing it.
Posted: Tue Nov 11, 2003 8:23 pm
by RUFF
Took 13.5" out of my wheelbase