Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

SWB Maverick Suspension/Tyre suggestions plz

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 36
Joined: Sun Oct 08, 2006 1:32 pm

Post by Braaap »

Mulisha,

I too have a SWB Maverick and I have just spent the last few months saving and buying parts for a suspension lift. My brother also has a GQ Patrol LWB with a 7" lift and I want to keep up with him. So I bought 5" coils as I wanted to avoid a body lift because the GQ's are famous for body cracks etc, so this way instead of 3" coil and 2" BL I went 5" coils as they were the same price as 4" at the time of buying them. I also bought adjustable TDog panhards F+R, transmission spacers from TDog as well, extended brake lines, proportion bracket for the rear diff. ProComp shocks, King springs from TJM, Toyota offset rims which I already had, Snake Racing adjustable upper & lower trailing arms and castor plates.

All the parts are going in on the 10th of March, a mate of mine who I met on here is helping me put it all in...I'm expecting the rear driveshaft to hate me, but I'll worry about it later as it's a weekend toy.

I also plan on getting either 33 or 35" MT MTZ's 33" = $310ea & 35" = $338ea from TJM. But I'll borrow some 33's and 35's and see how they work....
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Post by bj on roids »

bogged wrote:For each inch you go up you should go out 1 inch wider on the offset.
as in the diff moves an inch with each inch you go up?

sounds a bit high?
hands and mums dont count!!!
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

Braaap did you buy king springs or tjm springs that are made by king as tjm 5" springs are not 5" lift

also a note on panhard lengths a 6" lift will need approx 18mm longer front panhard n 28mm longer rear panhard so dont know where 1" per 1" of lift came from, or are you talking offset in track cos 1" of track per lift would make a patrol very wide with 10 inch of lift that or Ive missed something
Posts: 36
Joined: Sun Oct 08, 2006 1:32 pm

Post by Braaap »

nastytroll wrote:Braaap did you buy king springs or tjm springs that are made by king as tjm 5" springs are not 5" lift
nastytroll, I bought TJM springs made by King Springs, if there not 5" what are they?
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

bj on roids wrote:
bogged wrote:For each inch you go up you should go out 1 inch wider on the offset.
as in the diff moves an inch with each inch you go up?

sounds a bit high?
as you go higher, you have to counter the now higher COG with a wider wheel track to aid stability.

say you have a 5" lift on d shorty, Ideally you would need to install 2 1/2" wheel spacers on every wheel or get new rims made with the 2 1/2" extra offset built in.

1" wider per inch high is a crude measurement but it works.

bear in mind that this will be much more noticeable on a shorty than a LWB.

Jes
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

We really need to bring the Hottie thread back. As this is exactly the same.
THOUGHT FOR THE DAY....
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

The TJM coils will probably be about a 3" lift measure from the top of the top of the rim to the edge of outer gaurd or flare then fit the tjm coils n see if it comes up 125mm, it will proberly only come up 90mm or some thing simmilar. Dobbinson are the only springs that I've found to be a true lift, havent tried Lovell or ride pro yet but been told they are aswell
Last time I fitted a 65mm into a gu it come up 26mm in the front n 45mm in the rear
Most people that fit 4" dobbo's get 5" of lift
The track width increase sujested by jessie928 sounds about rite but with the wide track of the patrols we've never had stability issues that require that much track width, all my trucks run gq or gu diffs with out spacers n std toyota offset rims 15x8 or 16x8 also run gq ti 3 spoke mags, series 4 gu std steel 16x8 n series 4 std gu 17x8 5 spoke mags. We have 5 gqs shorty, single cab, extra cab, duel cab n wagon, lifts from 4" to 9" n tyre from 33"to 37" nothing wider then 12.5"
The track width increase would be important on a narrow track vehicle like 40-70s lc zook or similar vehicles that are prone to falling over
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

well i'm going to order on monday a

3" dobision lift
Procomp shocks
Procomp stabliser
castor (Bushs)
Gear box spacer


And still decing kinda but i think 99% sure MT MTZ's in 33x12.5x15 is the way i'm going.

What do you all think?

And this is were i'm going to get it all from i think unless i can get cheaper some were else.

http://www.4x4accessories.com.au/shop/i ... ucts_id=61

http://www.4x4accessories.com.au/shop/i ... ucts_id=52

Gearbox spacer is $40.


Thanks alot for ya help !! :D :D :D :armsup: :armsup:

Rick.
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

your give fourby's a chance for quote on rubber and kit? make sure to talk to ryano....

MTZ's--> mine are the toughest looking rubber sitting in nissan gympie waiting for nissn to come to party for gearbox or all hell breaks loose :twisted:
2015 200 Series Gx TTD - ................ Fark 3L's -
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

Kit has been ordered :armsup: :armsup: :armsup: :armsup:


My kit that i have ordered is"

3" dobision springs $135 pair
Procomp es9000 (nitro filled) red boots $540 for four :cool:
Iron Man Castors bushs $130 (has different degree adjustments)
Gearbox Spacer $60
RTC Toughdog Steering dampner $165

so for a total of $1165 i'm pretty happy...

I should have it friday and tyres go on saturday morning $1220 fitted balnced etc there 33x12.5 Micky Thompson MTZ's.


Now fitting this all i was told i need a press for the castor bushes :?

What else won't i be able to do myself? Becuase i wanted to try fit it all friday night so i can drive it Saturday to get the new tyres ... :?

Also if i can fit the bushes myself how do i go about it and what if i drive the car without them for a weekend?

Also anyone got pics were this gearbox spacer go to go and is it a hard bastartd to get in?

Thanks alot

Rick.
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

call the tire place and ask if they'll do castor bushes as part of the wheel alignment (wont be cheap)

you can get them out by either burning out the rubber and hacksawing the outer casing, or by getting the right sized tube and bashing them with a hammer.... both ways usually cause lots of :bad-words: :crazyeyes: :bad-words:

getting them in a vice and a couple of blocks of wood usually works to get them back in providing you do it square and use some nice thin grease.

your car will be driveable without them, it'll just get alot of bump steer or maybe feel like its wandering or maybe you'll get some mild - hardcore vibrations, or maybe all those plus more :finger:

Simon
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

Thanks mate

What type of press do they have to use?

Also how hard are these arms to take off to get the new bushs fitted into to?


I might take the arms off get the old ones taken out and new ones put in tommrow or friday and then fit them back on and lift the car friday arvo.


When u said it's not cheap how much am i looking at to get the old ones out and new ones in??

Cheers

Rick.
Posts: 20
Joined: Tue Oct 17, 2006 1:36 pm
Location: Canberra

Post by oldbugger »

My local 4wd place only charged an hours labour to remove both front radius arms, replace the bushes, including the ones at the rear of the rod and replace the arms....(I had previously removed the sway bar) $80 for the labour....well worth it and no :x :x :x

You'd want to be careful removing both radius arms at the one time...very little holding the diff in place with them gone and the springs under tension.

I also did both front and rear panhard rod bushes as well at an earlier time
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

oldbugger wrote:My local 4wd place only charged an hours labour to remove both front radius arms, replace the bushes, including the ones at the rear of the rod and replace the arms....(I had previously removed the sway bar) $80 for the labour....well worth it and no :x :x :x

You'd want to be careful removing both radius arms at the one time...very little holding the diff in place with them gone and the springs under tension.

I also did both front and rear panhard rod bushes as well at an earlier time
Cheers mate

I wouder if my new tyres or new steering stabliser would get stuffed up over a weekend say doing 400kms (max) without fitting these bushes becuase i would rather get them done the week after becuase i reakon they wouldn't have time to do this week.

Cheers

Rick.
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Post by shakes »

if your doing your shocks you may as well spend the extra few bucks and get a new stabilizer... if your car is still stock it will be cactus.

so i doubt you'll damage it anymore :finger:
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

shakes wrote:if your doing your shocks you may as well spend the extra few bucks and get a new stabilizer... if your car is still stock it will be cactus.

so i doubt you'll damage it anymore :finger:
HUH?

I already am getting a new Toughdog RTC steering dampner and new 33" tyres i was asking if i didn't do this castor this weekend will it stuff any of my new gear i have just brought?



Also this gearbox spacer how do i tell were it goes and is it hard to fit?
Any links that others have installed them etc?


Thanks alot

Rick.
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

Look at the crossmember under the gearbox. At each end there are four bolts holding it on. Between the crossmember and chassis there are two spacers already, this is where the extra spacers will go.

Put a jack under the crossmember, take out the bolts, lower the crossmember, put in the spacers, put in the new bolts if you got some with the spacers and do it all back up. Will take about ten minutes if you are competent with tools.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 195
Joined: Sat Mar 17, 2007 1:18 pm
Location: Sunshine Coast

Post by dattopimp »

Ooooh, so your lifting it now hmmm? Is that so you can come out and play lol. Or just doing it cause its like a low rider? I can't be arsed to read the 3 pages of posts lol.
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Post by GRINCH »

id let someone who knows what they are doing to press in the caster bushes as they can be a pain in the ars to get them in the right spot. your tyre shop may be able to do it
Posts: 195
Joined: Sat Mar 17, 2007 1:18 pm
Location: Sunshine Coast

Post by dattopimp »

My kit that i have ordered is"

3" dobision springs $135 pair
Procomp es9000 (nitro filled) red boots $540 for four
Iron Man Castors bushs $130 (has different degree adjustments)
Gearbox Spacer $60
RTC Toughdog Steering dampner $165

so for a total of $1165 i'm pretty happy...

I should have it friday and tyres go on saturday morning $1220 fitted balnced etc there 33x12.5 Micky Thompson MTZ's.
Mate, thats an awesome price.

I'm getting an OME dakar 2" lift for my MK and its costing...
Front spring pair $264
Rear spring pair $315
OME Nitrocharger shocks $410
And misc including bushes, u-bolts
Total $1127!!

The steering dampener was an extra 95 but i have a new one already.

And my quote for Mickey T MTZ's was exactly the same $305 a tire. Where you doing your business through?
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

Thanks alot guys

Dattopimp getting my tyres from Dalis in Tyrepower in Noosa great guy!


I tryed taking out my bloody radius arms so they can take the old rubbers out and put the new in and fark me i couldn't undo the bolts they were so farking tight it was bull shit so i'm going to get them to take them out becuase that was farked i have 4ft pole on the end of a breaker bar and they didn't budge at all :?

O well

He wanted a carton of XXXX for the old rubbers taken out and new put in so i'll see how much extra he wants for the removing the radius arms.

Rick.
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

A carton of good beer is a cheap price to pay for pressing the bushes out and the new ones in, let alone XXXX.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

Nelso wrote:A carton of good beer is a cheap price to pay for pressing the bushes out and the new ones in, let alone XXXX.
HEHE


I'm decing weither to worry about the castors this weekend and just do it next week becuase i have a couple of busy days and not alot of spare time and next week will be alot better.

Whats ur thoughts as i don't wanna have it fitted Saturday and find that i can't drive the car becuase of it or it's going to wear any of my new gear over the weekend like my steering dampner etc.


THanks alot

Rick.
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

A week of driving it like that won't do much, but it will wonder all over the road at higher speeds.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 936
Joined: Fri May 26, 2006 4:31 pm
Location: Sunshine Coast, QLD

Post by Mulisha »

Nelso wrote:A week of driving it like that won't do much, but it will wonder all over the road at higher speeds.
Oh ok

I'll have to see how i go i just don't think i could fit them this week anyway i'll pick it all up hopefully this afternoon i'll take some before and after pics :D

Cheers

Rick.
Posts: 158
Joined: Fri Feb 16, 2007 9:40 pm
Location: Brissy

Re: ..

Post by ROGQ »

JemmyBubbles wrote:33" MTR's
2" Sus, 2" Bdy Lift. (Can I stress keep the lift moderate... but whatever you choose you will deal with I am sure)

Armour everything up... you want to be able to slide over things.

Do a rear quater chop, wrap a bar around. Get some sliders on nice and high. Get a nice tube bar and tuck it up nice and high. If you feel extra keen throw a whole bunch of bash plates on underneath to further help with sliding over things.

Will be what I do if I get my time over.

Also with that lift combination you will have more than enough clearance for 35's. I run 35's with 4" suspension no gaurd chop up front and a 1/4 chop in the rear. Could even fit 36" pedes with a bit of a chop upfront.

Like I said I would never do anything over a 2" suspension lift in a shorty again.
Is this simply and purley cauz of shortys are a little unstable? if i had a swb i reckon id but a 5 inch suspension, 2 inch body, cut the guards a lil and chcuk some 38 rubber under there. but thats just me... im all bout the looks :cool:
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Re: ..

Post by MARKx4 »

ROGQ wrote:
JemmyBubbles wrote:33" MTR's
2" Sus, 2" Bdy Lift. (Can I stress keep the lift moderate... but whatever you choose you will deal with I am sure)

Armour everything up... you want to be able to slide over things.

Do a rear quater chop, wrap a bar around. Get some sliders on nice and high. Get a nice tube bar and tuck it up nice and high. If you feel extra keen throw a whole bunch of bash plates on underneath to further help with sliding over things.

Will be what I do if I get my time over.

Also with that lift combination you will have more than enough clearance for 35's. I run 35's with 4" suspension no gaurd chop up front and a 1/4 chop in the rear. Could even fit 36" pedes with a bit of a chop upfront.

Like I said I would never do anything over a 2" suspension lift in a shorty again.
Is this simply and purley cauz of shortys are a little unstable? if i had a swb i reckon id but a 5 inch suspension, 2 inch body, cut the guards a lil and chcuk some 38 rubber under there. but thats just me... im all bout the looks :cool:
You could just go the 3" lift, guard cut and fit 37s. There is no need to go 5" lift.
Its not cool, unless it's got boost :)
Posts: 158
Joined: Fri Feb 16, 2007 9:40 pm
Location: Brissy

Re: ..

Post by ROGQ »

MARKx4 wrote:
ROGQ wrote:
JemmyBubbles wrote:33" MTR's
2" Sus, 2" Bdy Lift. (Can I stress keep the lift moderate... but whatever you choose you will deal with I am sure)

Armour everything up... you want to be able to slide over things.

Do a rear quater chop, wrap a bar around. Get some sliders on nice and high. Get a nice tube bar and tuck it up nice and high. If you feel extra keen throw a whole bunch of bash plates on underneath to further help with sliding over things.

Will be what I do if I get my time over.

Also with that lift combination you will have more than enough clearance for 35's. I run 35's with 4" suspension no gaurd chop up front and a 1/4 chop in the rear. Could even fit 36" pedes with a bit of a chop upfront.

Like I said I would never do anything over a 2" suspension lift in a shorty again.
Is this simply and purley cauz of shortys are a little unstable? if i had a swb i reckon id but a 5 inch suspension, 2 inch body, cut the guards a lil and chcuk some 38 rubber under there. but thats just me... im all bout the looks :cool:
You could just go the 3" lift, guard cut and fit 37s. There is no need to go 5" lift.
more travel...?
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

You don't need to sit it higher to get more articulation, just run longer shocks.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Posts: 158
Joined: Fri Feb 16, 2007 9:40 pm
Location: Brissy

Post by ROGQ »

Nelso wrote:You don't need to sit it higher to get more articulation, just run longer shocks.
yeah but there is only a certain amount of distance a coil will go
Post Reply

Who is online

Users browsing this forum: No registered users and 13 guests