Why does ur rpm change when it gets hot?
Thanks
Rick.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Intercooler pics, where have you stuck em?
It's around $1600 for the kit which includes the barrel, water pump, radiator, thermo fan etc..., however you still need some brass fittings, hose clamps, hose, some electrical items and the pipe work to plumb the air from the turbo to the intercooler and the intercooler to the inlet manifold. In the end it ended up costing only slightly more than the denco kit ($1815) however you get a much better barrel.
Juzza (Centa Vic Performance 4wd) is in the middle of doing a FMIC on a GQ ute at the moment. If he approves I will see if I can get some pics of his setup. As it should be mounted this weekend. Large Garratt cooler.
Should also have some pics from Sparkys GU build.
As for FMIC vs TMIC. I dont know which is better. But Shreq (ontrack ute) dosent stay in one piece long enough for the intercooler to get dirty. And birdy and other racers probably pull there coolers often to clean them out.
With FMIC its surprising with the amount of things Turbo 4.8 has hit, I dont think he has punctured a core yet.
Should also have some pics from Sparkys GU build.
As for FMIC vs TMIC. I dont know which is better. But Shreq (ontrack ute) dosent stay in one piece long enough for the intercooler to get dirty. And birdy and other racers probably pull there coolers often to clean them out.
With FMIC its surprising with the amount of things Turbo 4.8 has hit, I dont think he has punctured a core yet.
THOUGHT FOR THE DAY....
I started the turbo conversion on my GQ running an RB30 (VL Commodore/R31 skyline motor) Saturday.
Its now 80% done, just go to build custom lines for oil and water, install the external waste gate and get the gas research gear installed next tuesday.
Its running a T3 Garret which I have converted to external gate on a highmount manifold, the old carby intake manifold has been replaced with a VL/Skyline EFI unit which will have a Gas Research Throttle body mounted to it in blow through configuration.
Some b4 and after pics below.
Cooler size 600x300X75
Before
Now
Its now 80% done, just go to build custom lines for oil and water, install the external waste gate and get the gas research gear installed next tuesday.
Its running a T3 Garret which I have converted to external gate on a highmount manifold, the old carby intake manifold has been replaced with a VL/Skyline EFI unit which will have a Gas Research Throttle body mounted to it in blow through configuration.
Some b4 and after pics below.
Cooler size 600x300X75
Before
Now
Last edited by NutterGQ on Wed Mar 21, 2007 9:44 am, edited 1 time in total.
Not always, most old shitters have a Christmas tree on top of the top radiator/thermo stat housing that has 3 or more vacuum lines. When the temp is high enough this can pull more vacuum into the dizzy causing the revs to rise making the idle go up making the fan pull more air.Mulisha wrote:Why does ur rpm change when it gets hot?
Thanks
Rick.
NutterGQ wrote:I started the turbo conversion on my GQ running an RB30 (VL Commodore/R31 skyline motor) Saturday.
Its now 80% done, just go to build custom lines for oil and water, install the external waste gate and get the gas research gear installed next tuesday.
Its running a T3 Garret which I have converted to external gate on a highmount manifold, the old carby intake manifold has been replaced with a VL/Skyline EFI unit which will have a Gas Research Throttle body mounted to it in blow through configuration.
Some b4 and after pics below.
Cooler size 300x100X75
Before
Now
my dad was gunna do the same thing tell me wot it goes like wen ur finished mate if u wouldnt mind
1993 Gq lwb with added xtra's :) sold
fj60,lifted,35s,33s for daily, 3f power!
fj60,lifted,35s,33s for daily, 3f power!
see they can put that much in to the cooler because they save a fair bit on dump pipe costsBad JuJu wrote:Damn thats a big ass snail .... but a shitty approach angle.stumpyGQ wrote:maybe you need a nice factory style one like this...
Thats what you call FRONT MOUNT
Imagine plowing that into a rock or the bottom of a dune..
GQ lwb . 31's beadlocked ,1inch sus and 37rwkw look out for EVIL GQ
dats da trik bro, teh fuly sik m8. 3 stge blow off vlve. Wooooch! did i sez itz fuly sik????!!!!!111oneoneone
God I wish I had that sort of cash to not only pay for a mod like that, but to also be able to afford the petrol to run it, the insurance for it and the driver training course to make sure I didn't kill myself in it.
Regards,
g@z.
God I wish I had that sort of cash to not only pay for a mod like that, but to also be able to afford the petrol to run it, the insurance for it and the driver training course to make sure I didn't kill myself in it.
Regards,
g@z.
Who is online
Users browsing this forum: No registered users and 11 guests