Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Any lightforce dealers seen carnage like this ....

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 76
Joined: Fri Apr 13, 2007 11:49 am
Location: Maitland, NSW

Post by connell »

jeep97tj wrote:
connell wrote:My mother just came back from NT & her light force lights broke off leaviing just the mounts & globes.
They're less then 12months old, she's going to contact LF to see if she can claim on warranty.
Sounds like they have been unscrewed and stollen or vibrated off.
They were not unscrewed! Cause the car travelling behind stoped & picked them up, they had snaped off from the mounts!
RT4wdc - HJ75 2' sus, 2' body lift, 35' cooper st's. chopped chassis & tray.
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

RUFF wrote:
droopypete wrote:No other light I know of would have lasted one take, let alone 4, and the light still works perfectly.
Any prizes for guessing who is now in possesion of this light :?: :D
It is in the back of the land rover ready to go to Alice Springs next month for more filming :finger:

then hopefully I will get it ;)
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

droopypete wrote:
RUFF wrote:
droopypete wrote:No other light I know of would have lasted one take, let alone 4, and the light still works perfectly.
Any prizes for guessing who is now in possesion of this light :?: :D
It is in the back of the land rover ready to go to Alice Springs next month for more filming :finger:

then hopefully I will get it ;)
So how much stuff have you ended up with so far. Did you end up with a working LCD after that other project that was posted on here?
THOUGHT FOR THE DAY....
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

funny story there Turps, I was able to reasemble the LCD TV and get it working agian, but some lowlife broke into my home and stole it :x
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

droopypete wrote:funny story there Turps, I was able to reasemble the LCD TV and get it working agian, but some lowlife broke into my home and stole it :x
Bastards. I would find them and wake them with a big stick.
THOUGHT FOR THE DAY....
Posts: 403
Joined: Sun Jun 18, 2006 3:46 pm
Location: vic

Post by brentz »

Cheezy4x4 wrote:I have many stories on how tuff LF light are, one being TTC 2 when I rolled onto the lights with the Mav and all still where working, also during a SS in a simex hit 4 roof lights at 80km with a low branch and only flung them backwards on there mounts. I can say nothing else would have taken that type of trashing.
As for warranty (THINK ABOUT IT). Sorry mr Holden/Ford, I smashed your vehicle into a wall and it dosnt work any more and I want a new one.
(Sounds pretty dumb). ????????
i can vouch for another one with u!
dont no wether u were driving or not but at the 2005 melbourne 4x4 show u were there and one of ure buggies rolled onto its roof and bang straight on the lights not a bit wrong with them infact u were ontop of the lights with your buggy!
brentz
TUF-60 starting build soon
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

turps wrote:
droopypete wrote:funny story there Turps, I was able to reasemble the LCD TV and get it working agian, but some lowlife broke into my home and stole it :x
Bastards. I would find them and wake them with a big stick.
It actualy worked out good, insurance gave me a nice new one :armsup:
Peter.
Cable bracing is the way of the future!

v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Posts: 1698
Joined: Sun Nov 28, 2004 7:26 pm
Location: Canberra Australia

Post by Ezookiel »

D'Oh !!!!!


Someone smack me over the head, and then smack LightForce over the head as well.
I was out 4wding with a mate and a mate of his on the weekend, and noticed my mate's mate's 240 Blitz lights, and when I told him about the damage to mine, he said the whole assembly unscrews and can be replaced quite cheaply, as LF sell the whole reflector and casing as a seperate item, and showed me the way they unscrew.

See if I hadn't bought second-hand, that info probably comes with the lights, but when you buy second hand you never find this info out.

But why the hell didn't the customer service manager at LF tell me this when I emailed them the photos of the damage and spoke to him on the phone?

I've been putting up without them for weeks now, when it's apparently a simple matter of ordering a replacement reflector.

Pissed at myself for not knowing this, pissed at LF for not telling me this.
Now, anyone know where to order the new casings from?
[url=http://www.4x4him.org]Bringing the Christian Rock Crawling Community a little closer[/url]
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Post by turps »

Mine lost there shine and they replaced them as a whole also. It was only the reflecter at fault.
But there still nice and shiny.
But I do have some early type LF240's that I brought off of ebay in good condition the seller said. Well his opinion of good condition and mine are very different.
SO I need to get some reflectors at some stage.
THOUGHT FOR THE DAY....
Posts: 250
Joined: Tue Jul 24, 2007 5:03 pm
Location: Toowoomba, Qld.

Post by stampy4x4 »

I did not want to try and claim warranty. When or if I contact LF it will be because I feel that they might be interested, especially as they design their lights for Australian Conditions, and that includes COLD as well as the traditionally perceived HOT. I would not ask for, or expect, warranty on them, but I know they appreciate feedback on their product to aid them in designing better and better products. Personally I love their products. There handheld spotlights for shooting, are untouchable, compared to any copy cat light out there. I've taken a fox at over 200 metres using their handheld spotlights, which is pretty hard to do with the property owners own handheld spotlight, that next to a LF looks like a candle.[/quote]

Firstly, yes all the parts that make up a Lightforce light are available to buy individually - no dramas there.

Secondly, definately contact Lightforce (through a dealer/retailer or directly in South Australia). They will be more than interested!
I notice the covers are still intact. With the housing can you tell if it has cracked front to back or back to front? One thing the manufacturer has been working on is a small problem in the housing, at the back where it threads on to the legs over the bulb. On some older lights the plastic has developed tiny cracks, almost like stress fractures in this area. The cold weather as well as nudging the wall may have just been enough to cause the housing to compress and actually split from the back towards the front. Worth checking because the couple (and I stress only a couple) of these that I have seen like this, Lightforce has replaced.
gute Reise!

4ROCs Offroad
Posts: 250
Joined: Tue Jul 24, 2007 5:03 pm
Location: Toowoomba, Qld.

Post by stampy4x4 »

Ezookiel wrote:I sent LF the details - again I stress NOT to ask for warranty but because I thought they might be interested, and they asked for my contact details.
I supplied those details yesterday, unfortunately after business hours, and today they told me the guy who asked for the details is off sick today, but that he'll ring me either tomorrow or as soon as he gets back to work. Sure can't fault them on communication with clients.

I looked up their XGT lights today, and I found I was wrong, they are not metal bodied. But will probably still be my next step in lighting if I have to replace the 240 blitz's
The 240 XGT was designed as the premium light to run the HID setup in, but as far as the two go when setup with the 100w Xenophot bulb the Blitz actually projects a better light as it is a true parabolic reflector whereas the XGT is a slightly different shape. An advantage to the construction of the XGT however is that it does not protrude quite as far as the Blitz.
Both bloody great lights though!
gute Reise!

4ROCs Offroad
Post Reply

Who is online

Users browsing this forum: No registered users and 98 guests