Page 3 of 3
a
Posted: Wed Jan 20, 2010 11:15 pm
by ashbilt
ahh huh well there ya go ay, looks good mate. like i havent been on this for a while but looks nice an neat, not bad ponys for a trickle of pressure, i hear they throw rods at about 14-15 pound.
a
Posted: Wed Jan 20, 2010 11:19 pm
by ashbilt
also, the intercooler... what brand/where from? good price?
Re: a
Posted: Thu Jan 21, 2010 12:08 am
by 05_ENFORCER
ashbilt wrote:also, the intercooler... what brand/where from? good price?
Plazmaman/Over East/Expensive, but VERY good!
a
Posted: Thu Jan 21, 2010 10:12 am
by ashbilt
cool cheers will look into em
Posted: Thu Jan 21, 2010 10:14 am
by 05_ENFORCER
Have a look at frozenboost and laminova as well
Posted: Thu Jan 21, 2010 11:41 pm
by ashbilt
funny ya should say that i nearly ordered a frozen boost one last week then i thought i might look around first, cheers
Posted: Fri Jan 22, 2010 12:51 am
by 05_ENFORCER
I bought and intalled three different brands, PWR, Frozen Boost and Plazmaman in that order.
Plazmaman killed the Frozen Boost by 8 degrees, whipped arsholes on the PWR crapolla.
Back to back tests on the dyno as well as different ambient temps, the Plazmaman came out on tops.
Never tested the Laminova, as the intercooler I required was almost $1200, half the price of the Plazmaman.
Do your own research for your application.
I am more than happy to help others out.
Cheers
a
Posted: Sun Jun 13, 2010 4:38 pm
by ashbilt
well well well time to drag this old thread back up as i now have a boss 260 on the floor of my garage, the time has come to make templates and nut out how i'm gonna do this. plan is to plum it up to a patrol manual box an go from there.
to my knowlage noone has yet done this, anyone who can tell me otherwise please do so.