Page 3 of 4
Posted: Sun Jul 18, 2004 7:17 pm
by 85zook
www.cardomain.com/id/85zook
mods have kind of stalled at the moment due to a rear diff problem brought on by snatching out a hilux
anyway ive got an autotechnica wheel going in on tuesday and will be tinted within a month or so
Posted: Mon Aug 02, 2004 5:00 pm
by roc box
h ey guys first reply just signd up my names troy from nowra got 84 1ltr hard top s3hoppers sprungover 15x8s 32 muds 2inchbl arc lokkers front+rear extended lines etc
Posted: Mon Aug 02, 2004 5:44 pm
by roc box
sorry theres no pic havent got facility to send one
Posted: Tue Aug 03, 2004 6:12 pm
by RIKSTR
Quick update of my GV
Posted: Tue Aug 03, 2004 7:13 pm
by deejay181_72
not a lot done to mine....had it for about 12 months......85 model with 2 inch springs, extended shackles welded rear diff, roll bar and motorway retread mud tyres (30x9.5's)
Posted: Mon Aug 09, 2004 1:04 am
by RockhamptonZOOK
89' sierra (No foto sorry)
40mm body lift
F&R Revolver shackles
F&R Lockrights
ARB bar and 6000lb Warn
32" MTRs
series 3 rockhopper
snorkel
Uniden Uhf
Very soon to have 2inch offset rims
Posted: Mon Aug 16, 2004 7:14 pm
by Toos
89 Sierra std 1.3 5 speed
30mm bodylift
2 inch enforcer springs ome shocks
31" MTR's
ARB winch bar
Rollbar
Aluminium checkerplate sill and fuel tank guards
Snorkel into glovebox
Rear lockright in, front in
Rock sliders
Custom rear bar
S3 rockhoppers
GTI motor to go in soon.
David's Zook
Posted: Mon Sep 20, 2004 7:15 am
by Mudboy
I live in Sydney owned my Zook for only a month, also have a Vitara.
85 Longie wide track
Front and rear lockers
Transfers gears
Extended Shakles / Drop shakles
3 " body Lift
custom drive shafts
1.3lt motor
custom springs
Rancho's all round
Sprung Over
Custom Exhaust / extractors
Posted: Tue Sep 28, 2004 7:15 am
by lilpigzuk
1983 SJ410
87 Swift GTi engine
SJ410 gearbox, 4.16 transfer
Standard front and rear diffs
Offset spokies on 31 x 9.5 handcut tyres
6 point external cage
legacy radiatior in the rear
Swift fuel tank (intank pump)
hardtop cut down to half cab
cut guards and sills
custome front and rear bumpers
No Future mods because I have got a new Zuk...
97 Samurai
Standard engine/drivetrain
2" lifter coils
offset spokies on 31x10.5 MTs
offset spokies on 31x10.5 ATs
Custom front radius arms (castor corrected/strengthened)
Mods to come.......
Damage the SJ410 so I can swap the engine in.
rockhopper (currently being built)
rollbar
modify front bar to house a winch of some form
Rex
NZ
Suzuki
Posted: Wed Sep 29, 2004 9:37 pm
by Fatrolls
Holden Drover project vehicle.
High top hard top 1985, needs TLC.
Currently very dodgy. Adding some daihatsu feroza seats, and just trying to get it roadworthy before major mods... Yeah, the second 4wd. Baby bro to the fatroll!!!!!!!!!!
Posted: Fri Oct 08, 2004 2:39 pm
by Mudzuki
Finally got some pics with crap digi
Specs for my Zuk:
1988 Wide Track Sierra
Red (Pic looks a bit orange)
Removable Resin Top
235/75 on 15x7 Trak 2
2" Body Lift
Bullbar
Custom Light Bar with 4 Roof Lights
Another member of the "Plastic Flare Wide Track Group"
Plans
SPOA
34" JT2s
5.1 Diff Gears
UPDATE: Now own 34" Swamper LTBs on 2.5in backspace rims, will be on soon
Posted: Sat Oct 09, 2004 6:46 pm
by tuffsierra
hi my name is garry i live in perth
i own an 89 wide track
mods.
$80 dollar camo can paint job to hide scratches
bullbar spotties usual stuff
1.3 extractors everything else stock untill it breaks.
Posted: Mon Oct 18, 2004 3:21 pm
by Spike_Sierra
Gday guys,
1985 Sierra 1.3 5 speed Pereshut Red
Hardtop JX SWB
30 inch motorway mud terrains
1.5 inch shackle lift
50mm body lift
painted flares
extended breathers, diff and tcase
tinted windows
scratches etc.
Mods to come, homemade snorkle, aluminium
dobson head
Sillbars
Piccies>
Only one extended shackle at this time, bumpers removed as body lift just went in, need to make some brackets.
I call her Redzook Jr.
http://groups.msn.com/4x4tasmania/brennospics.msnw?action=ShowPhoto&PhotoID=372
http://groups.msn.com/4x4tasmania/brennospics.msnw?action=ShowPhoto&PhotoID=371
Posted: Mon Oct 18, 2004 3:31 pm
by redzook
is it just me or have u only got extended shackles on the passanger side?
i rember just after mine was painted
Posted: Tue Oct 19, 2004 8:34 am
by Spike_Sierra
Yeah, i had just put on side in to see how much more lift i had got, i still needed to take them off again to paint and add RHS box section in the middle. But ive got all four on now
Posted: Tue Nov 02, 2004 11:30 pm
by y0di
yodi here aka suzi-freak
live north of brisbane
got a 92 lwb vite jlx auto
stock standard
new motor .020 oversize
new cheese cutter tyres
have owned 4 sierras previously and 2 landcruisers, go the ZOOKS!!
married with kids so money is scarce
however, wish list:
3" lift
detroit rear
235/75's on 7" rims
rigid front like celias
extractors...uhf.. stereo.. etc
Posted: Fri Nov 05, 2004 10:59 am
by superzuki
hey just registered the other day im dayne and just finished high skool...i drive a 86 siera its dark blue with a fibr glass canope its my second 4by i had a sIII landy which i sold to get a zook
. its stock standard down to the dodgy tyres. i plan on doin a 2 inch body lift extending the shakles and fitin some 30 inch tyres
Posted: Fri Nov 05, 2004 4:29 pm
by Aza
welcome to the board
glad to no im not the only young one here
(im 16)
Posted: Fri Nov 05, 2004 11:09 pm
by spamwell
hey i'm 16 also
check out my suzi
1982 with a G13a engine swap
29inch maxxis 253 bravo M/T
on 15*7 ROH Track 2's
umm will have more mods
Front, rear and roll bars coming
And some shackles and paint are in the works
Posted: Sat Nov 13, 2004 5:26 pm
by beally
hey spam well, im 17 and on the sunny coast as well, im going to be getting my suzi in the next few weeks, when i do ill take you 4wding at this little place i know of where i used to ride my motorbike.
Is yours on the road?
Posted: Wed Nov 24, 2004 1:21 pm
by Gibbon TSAM
my zook!
currently - 85 drover high top
1.6 carb
31" baja radial claws
2" body lift
second hand OME shocks
original and very sagged springs
garden edging front bar
a few dents here and there and some squeeky noises to add
character.
Posted: Wed Nov 24, 2004 10:46 pm
by REDZUK
My Zuk mods inc:
SPOA
2"BODY LIFT
REVERSED WHEELS
WITH 31" MUDS
SERIES 3 ROCKHOPPER GEARS
WELDED FRONT & REAR DIFFS
my zook
Posted: Thu Dec 02, 2004 8:18 pm
by bennybigballs
howdy my name is Benny
have an 81 tin top
2" body lift
3" lift springs with 2 leaves removed
1.3 roller engine with mild cam 5 spd g/b
painted bright yellow or orange if you live up near newcastle or at nelson bay chances are youve probably seen it
31" a/t front and 2nd hand bf a/t rear couldnt afford new ones on 15x8 F100 rims
1.3lt running gear much better than the 1lt
have home made snorkel just needs a rampod
cut bullbar
cibie super oscars
uhf
Posted: Fri Dec 17, 2004 5:02 am
by Gareth
Hi
my zook is a 98 coily
4" spring lift
2" body lift
simex 32" centepedes
9000 winch
home made bar work front back and sides
rancho 5000 shocks all round
rockhopper s3
arb air locker in rear
snorkel
and now some battle scars
and a bent rear trailing arm :(
[/img]
Posted: Fri Dec 17, 2004 5:42 pm
by RB zook
Gareth wrote:Hi
my zook is a 98 coily
4" spring lift
2" body lift
simex 32" centepedes
9000 winch
home made bar work front back and sides
rancho 5000 shocks all round
rockhopper s3
arb air locker in rear
snorkel
[/img]
mate need pics
Posted: Thu Dec 30, 2004 2:01 pm
by Wesley
Had my pos for a while never been happy with it tryed to sell if for ages then tryed to just sell suspension no one was intrested so i guess im stuck with it. Sorta started doin up another one got yj springs n crap though it will prob have to wait till i buy a house now.
92 sierra, 5" lift, 31 wrangler mtr's etc not doin any more mods to this pos. Ive learnt a lot from the mistakes ive made on this project though i will lose money its still no as much as some other ppl i know have lost on there vehicles ill prob end up just sellin this to my brother for a good price
and make another one.
here is a pic click on the shortcut at the bottom for more pic's
Posted: Fri Dec 31, 2004 12:51 am
by spamwell
Posted: Wed Jan 05, 2005 2:26 am
by Russian
Hi everybody!
This is my rig:
- stretched swb to lwb with rear alu/square tubed rear, tubed front
- 4.16 t-case with trailtough bucket armor
- stock engine and gearbox
- stock axles with birfield cups, breeze inc. oversteering
- SOA on stock leaf springs and 9012 ranchos
- 34x9.5 swampers
- comeup dv9000i winch with synthetic rope
soon to be on TLC-72 axles, 35x14.5 boggers, coils, powersteering, bobbed lwb body tub, cage, etc
Posted: Thu Jan 06, 2005 4:43 pm
by mlzook
Hi i'm Mark from Sydney. Currently my rig is as follows:
2 inch body lift
SPOA
30x9.5 BFG A/Ts
hopefully getting a rockhopper soon
maybe hilux diffs too.
Posted: Sat Jan 08, 2005 5:17 pm
by Huggy
my hairdressers car
2 inch body lift , 2.5 inch exahust,245/75/16 mtrs,
