Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engine Take Out

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Re: .

Post by HeathGQ »

lowndsie wrote:I am a little concerned that the timing might be out now cause i couldnt stop the flywheel completey from turning when putting torque into those bolts???
why would the timing have changed??? did you have the belt off? - if you did you should have marked both crank and cam and the belt at each point

lowndsie wrote:Took ages to get that bloody shaft lined up with the clutch when trying to push the motor into it's spot.
homer wrote:yeah they do that
Heath & Melissa - 93 GQ LWB.
Posts: 517
Joined: Fri Mar 12, 2004 9:04 am
Location: Bathurst

.

Post by lowndsie »

nah i left the belt on....dont tel me i should have taken it off????
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Post by murcod »

No need to take it off unless you were fitting a new one (or changing the water pump?)
David
Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Post by HeathGQ »

lowndsie wrote:nah i left the belt on....dont tel me i should have taken it off????
provided you didnt turn the engine over backwards, it should be all fine. turning it backwards can make the belt skip a tooth or worse.
Heath & Melissa - 93 GQ LWB.
Posts: 517
Joined: Fri Mar 12, 2004 9:04 am
Location: Bathurst

.

Post by lowndsie »

fingers crossed.
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...

Re: .

Post by Area54 »

lowndsie wrote:yeah theres been a bit. been sick so i havent got all that much done.

i've done all the repairs and got the engine back in last night. i've only done a few bolts up so i'm not really in the stages of connecting everything back up yet.

I am a little concerned that the timing might be out now cause i couldnt stop the flywheel completey from turning when putting torque into those bolts???

Took ages to get that bloody shaft lined up with the clutch when trying to push the motor into it's spot.


How did I know that would happen? :roll:
Built, not bought.
Posts: 517
Joined: Fri Mar 12, 2004 9:04 am
Location: Bathurst

.

Post by lowndsie »

well the engine is back in. everything is hooked up except i haven't added the new power steering yet. I started her up and she sounds good..... :lol:

Haven't gone for drive yet as i've still got some work to do. The new sound system is working fine and i've got a few new gauges to add to the dash.

The timing seems fine too (guess i was lucky).

I'm off in adelaide for work for a week so nothing else will be getting done until next weekend.

Thanx for everyones help to get me this far. I was saying today that if someone was to tell me 12 months ago when i brought my fez, that i would have taken the engine out i would have laughed my head off. :lol:

Now the real tester will be over the next few weeks to see how everything holds together.
Posts: 4323
Joined: Wed Dec 11, 2002 8:42 am
Location: Gold Coast, Queensland

Post by HeathGQ »

well done. Glad it has worked out.
Heath & Melissa - 93 GQ LWB.
Posts: 2199
Joined: Sat May 01, 2004 4:59 pm
Location: dandenong vic

Post by built4thrashing »

GOOD WORK lowndsie

the first time doin an engine in a feroza is a real prick.

it gets easier once ya have done it a couple of times.

i did the engine 3 times in my old roza. ended up putting its original engine back in it (with a minor rebuild) just b4 i sold it.

now its time to break something else
1999 SQ625 Manual Grand Vitara. Lifted, Twin Locked, 31' Extremes, dual Batteries, Winch.
Lots of custom gear as I cant afford the proper stuff.
Posts: 2431
Joined: Thu Sep 04, 2003 12:02 pm
Location: Stayton, Oregon, USA

Post by SimplyPV »

well done! :armsup: keep us posted as to what happens and your results. glad to hear you didnt have any major dramas. your lucky mate. i didnt have the slightest clue what i was doing when i did mine. took me 2 and a half months to do it... :rofl:
[quote="simplypv"]its a Strine thing and i just dont understand![/quote]
Regards, PV
Team [size=134][color=red][i]Anti-[/i][/color][/size]Asshat [b][color=orange]#5[/color][/b]- Yank!
Posts: 517
Joined: Fri Mar 12, 2004 9:04 am
Location: Bathurst

.

Post by lowndsie »

Well i've just finished doing a 10km test drive and thought i would post my results. Fistly here's exactly what was done over the last two months.

All 3 engine mounts were replaced with seatbelt mod.
Front and rear drive shaft oil seals replaced.
Sump seals replaced and gasket goo applied.
Six inch round speakers fitted to front doors.
6 x 9 Sony Explod speaker fitted to rear panels.
Sony Explod MP3 CD Head unit fitted.
UHF is now running through one of the old front stereo speakers (works a treat and puts out good clear sound).
Fuel Injectors were cleaned and tank cleaned out and filter replaced.
Main engine oil seal replaced whilst engine was out.
Still in process of wiring new voltmeter gauge.
Power steering unit added. (never had power steering before) Still waiting for part to fit the ilder hoses and I am trying to track down a leak in one of the oil hoses.

I am now in the process of fitting an amplifier and a 10 inch sub. I am fitting it all so it's easily removable for camping and shooting trips. After that is complete i will be making up a fold down shelf off the inside back door so a 2 burner gas stove can be placed on it whilst out camping. I am also working on a dual battery setup for the near future. Once all this is done i will be starting to work on turning a box trailer into a camping setup for doing some long distance touring.

Now for lessons learnt:

* Never allow a mate to use a rattle gun to do a bolt up onto the engine block. (it snapped off and i wasted a day trying to get it out)
* Father in laws always talk like they know everything, but are never seen when it comes to needing a hand.
* A wife really does love you when you borrow her car for 2 months and she only complains twice.
* Even crap mechanics are useful for borrowing tools from.
* There is such a thing as "mechanics hands"
* If in doubt, drink more beer and then make the decision.
And finally, the more you do by yourself, the greater the feeling of satisfaction once it's done.

Thanx to everyone for offering their advice and helping me do something that I would never have thought I could do. And thanx to Big John for lending a hand whenever it was needed. (John, that doesn't mean i think any higher of your Hilux).
User avatar
rOd
Posts: 804
Joined: Tue Sep 30, 2003 7:35 am
Location: In the shadows

Re: .

Post by rOd »

lowndsie wrote:* There is such a thing as "mechanics hands"


Thats great Jason, now that you have experience, can you help me fit my rear lockers. :D
Dont expect mere proof to sway my opinion.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest