Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

chopin the ass off my gq!

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Beastmavster wrote:The bar will cover up many sins :D

Interested in some recovery hooks I saw on a GQ SWB on the weekend... a loop that's bolted into the standard mounting points for the rear bar. Thy kind of drop down a bit so they go under the new that'll be going on.

Any ideas where they come from?
Is it the same as the loop on the front driver's side chassis rail maybe?

Jason
This is not legal advice.
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

Image
heres the rear bar although not complete!
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

Image
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

Image
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

Image
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Posts: 372
Joined: Mon Nov 03, 2003 10:12 pm
Location: melbourne. sth eastern subs

Post by bagsy »

I welded my plates in . I felt it was easier to do that than risk kinking it when its folded. Good luck , its looking good so far. shane.........
You do not have the required permissions to view the files attached to this post.
http://www.biders4wd.com/
http://www.autobalance.com.au/
www.4bfabrications.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests