Page 3 of 3
Re: compressor
Posted: Fri Apr 08, 2005 8:57 am
by blkmav
gtwebbie wrote:I spoke to Glenn at airride yesterday and he told me that even though the dc5000 was cheap $250 ,it had a lot of things that were appealing to me and that wern't mentioned by the supplier uch as it had to be away from the elements(dust,water and the like)also it wasn't an oil less compressor so you had to manually oil it wich meant unhooking the tank and the lines
and also it had to be hooked sraight to the battery via a battery cable not wire .So after all this discussion I brought tha Viair 400 he said that matched to a 20L tank it would do all i want and more.BTW i asked weather or not 100% duty cycle was the go and he said that,they are great but slower so i figured that if this will run 33% duty 20mins straight that will do me.At $ 365 including loom and some fittings with a 5 year manufacters quality warrenty too my door i said send it.
I'm probably going to do the same. Did Glenn sound a bit Grimace to you?
compressor
Posted: Fri Apr 08, 2005 2:08 pm
by Webbie
He He He He, You said
Grimace 
Posted: Fri Apr 08, 2005 2:11 pm
by Webbie
murcod wrote:Seem to be the same compressors in the pics on both sites???
The Maxair works out to be 2.54 CFM. Did the price you paid include hoses and fittings etc?
Some ,although I will have to add the ones to hook up the tank.
BTW 2.5 cfm@33% and as tested will do a 35x12.5 from 15-30 in 2 1/4 minutes
Posted: Fri Apr 08, 2005 4:58 pm
by SASS
Was told buy tjm that kym bolton runs one of these compressor on his GU with no probs (been fully submerged twice and works fine). I was told they do not require oil! Anyone else use one of these compressors? Every where i look someone else has different write up on them. As for no dust or water environment, it is a fully sealed unit and all the fan does is force air over the motor housing to keep it cool, cant see why they say no water or dust?
Posted: Fri Apr 08, 2005 5:35 pm
by up2nogood
http://www.extremeoutback.com/index.cgi ... 108&pid=99
Is this one oilless?
And is it made in Aust?
100% duty cycle & 3cfm looks good......