Outer Limits 4x4 Board

if I was to put a clip on I would have to do a skid as much as I would like too Im not keen on doing one with a fuel tank as a bucket and a tempary tailshalft.(no transfer)

I get some pics tonite.

i am the wiring loom king.....

That meens I must be the king of crazy ideas?

sounds wikid...
could we have a quick run through exactly what u had to do to make it work etc?
and exactly what everyting cost you?
im lovin this ideah
Phil

if you read the rest of this topic you'll find all the info you need to know......

congrats dude

always good to see new ideas found

im sure u have made a new mod that will get used alot

it will get known as "RHETT'S INJECTION"

some pics for those of you who are interested

can't add a movie, been trying hard. Does anyone know how to do this??? Have shrunk it to under 2 MB

If not send me an email and I'll email it back to you

it's not very clear, shot at nite with a bucket of petrol sitting beside me!!!

now i wonder if this will work on this little 1 lt i have sitting here

I don't see why not. Im going to play around now and see if I can fit a little turbo. (I get bored easy)

Send me the vid to **** I will host it

hey rhett you sound like a mate of mine at west cooroy but he is into corolla's but he is going to but a swift 1300 twincam in a little ke25 corolla with a sierra 5 speed

You should make a kit for these mud4b!

got any build up pics, with any fab stuff u had to do? looks good tho

Hey mud4b didn't do it all He just helped me with the wiring!!! It was my idea and I dicked around for three weeks to get it to work.

Start your own website then

But seriously good work def one for a Tech thread

Stumped
Most of the fabricating was the adaptor plate for the throttle body and the hybrid dizzy. The rest was just drilling and taping holes in the manafolds for senses Don't get me wrong it wasn't easy but doable.

Its still running a bit fuely and idle is at 1400rpm but I'l get that sorted something to do with one of the wires not reading 5 volts. When I get the thing driving again Il reset the computer and give it a abulute pizzlen to set it to high performance(as high performance as a standard 1.3 could be)

Santos wrote: Start your own website then

But seriously good work def one for a Tech thread

already there has been since he first started it

Yeah but a 'photo's of work done along with consicisive thoughts/instructions for the masses that are still on training wheels' type of thread
(for thos like me )

OldGold wrote:You should make a kit for these mud4b!

no way...
this is something the backyarder(with some brains and thoughts and bundy) could do without paying a shop to do it.


i only helped out with the loom, rhett done almost all of the work..

Vid is hosted

Here

Right clicky save target

Shes a goer!!

Wtf was said in the vid? I hear the bundys had taken affect by then





Random: Dropped a deposit on my zook today.

Yes I had petrol down my pants as I took off the bucket tiped over, and no I don't sound like the cookie monster all the time

Should read "mud4b is the wiring loom queen"

any one know of a car that runs this kinda efi set up thats around a 2.0 size engine

also where are the injectors located on this thing

took it to landcruiser park on the weekend and was happy with the motor. a lot more snot than it use to have. I only hade one drama all weekend that was when a fuel hose came off in the tank half way through an xrcc couse at 2.30 in the morning.

But I cleaned my car this sarve and drowned my computer(forgot all about it) its now soaked in crc under a lite. when I put the ignition on it turns the injector on enough that the motor hydroliced on fuel!!!

Its ok. it goes again