Page 4 of 4
Posted: Wed Jul 08, 2009 10:06 am
by CanberraMav
should have shown a pic of my actual motor..
So the hose that is cut in the picture goes to the brake booster?
In the bottom pic what is the hose that im pointing to and where does it go to? Cheers.
Posted: Wed Jul 08, 2009 8:52 pm
by 6rxhx
The hose that is cut is where the booster connects to.
The hose that your pointing at connects to the cold start valve. From memory it connects to the thermostat housing.
Your also missing the hoses for the egr valve, that little red/brown thing with 2 hose barbs on it. One goes to the charcoal canister, the other to your inlet manifold.
Posted: Thu Jul 09, 2009 3:54 pm
by CanberraMav
Can i just blank them off or leave them all together?
Car is not going to be regoed or anything
Posted: Thu Jul 09, 2009 6:30 pm
by 6rxhx
Just blank off the outlet on the manifold for the egr. Wont make any difference to the running of the engine.
Posted: Sun Oct 18, 2009 2:17 pm
by jimbo jones
anyone want to come help wire up my gti motor
got the basic's done need help with the coil wiring there will be beer involved
