Outer Limits 4x4 Board

so diffs are almost ready to roll under and then its just the last few rear bits to go in for the rear part of the cage ,am aiming for tough tracks round 2 so hopefully all goes well for getting ready for that

C'mon kelvin u done yet!!.....

Yeah Sam its been a few set backs
Diffs ect all done installed all i have left to do is couple bars in the rear of the cage and work out the heights for the fox air shocks and all done

then just small things like diff breathers and a once over to ensure everythings done and working proper

a few update pictures it should be all done by saturday

them new rear shocks are pimp brah!!!

kelvin just a tip champ, move the backstays at the top outwards towards where the centre bracing starts on the B pillar, wil make it look 10x sexier! but if you like it how it is champ run with that! other then that tray looks mint buddy!

Cheers
Jake

hugezook wrote:kelvin just a tip champ, move the backstays at the top outwards towards where the centre bracing starts on the B pillar, wil make it look 10x sexier! but if you like it how it is champ run with that! other then that tray looks mint buddy!

Cheers
Jake

ah yeah so run it at a angle back to close to the corners of the b pillar
they only tacked on will check it out today

GRIMACE wrote:them new rear shocks are pimp brah!!!

they are pimp as you should see how hard they are you would love the touch of them grimace ,the ride is really good with them to

[quote="discothrasher"][quote="hugezook"]kelvin just a tip champ, move the backstays at the top outwards towards where the centre bracing starts on the B pillar, wil make it look 10x sexier! but if you like it how it is champ run with that! other then that tray looks mint buddy!

Cheers
Jake[/quote]


ah yeah so run it at a angle back to close to the corners of the b pillar
they only tacked on will check it out today[/quote]


Yeah will just add alot more strength into it if the backstays, and b pillar bracing all meet at the same point on the b pillar, so run them at a slight angle from the b pillar bracing down to where the side bars of the tray meet the centre part.... that will look wicked!

Cheers
Jake

So the truggy is pritty much done just a few little tweaks after the first test today then connect the winch and the auto cooler with thermo fans and done ......here are a few pics of it today in the intial first flex up test

i love it! well done

awesome work kelvin! what size shocks are they??

Cheers
Jake

and whats the wheel base?

yeah they only 14 " but the way we have set them up is getting max out of them the shock hoops have been designed to allow for up to 20"

wheel base is 102 at the moment but in a couple months when we do the front suspension it will be taken further out

did a few more adjustments yesterday lifted the wings up more and aded a few extras will post up some pic tonight

So truggy is now completed except for a few alloy panels to go on the rear wings
A big thanks goes out to OUTCAST OFFROAD for all there input and help in building this unusual rig ,and i would definately recommend Greg for any fabrication work not just truggy builds but sliders rear bars and any under body protection
Thanks again OUTCAST OFFROAD ( grover69 )

sweet looking machine there mate, unfortunately I seem to keep getting distracted by your avatar

Nice work...so when do start work on making the front flex?

Micka wrote:Nice work...so when do start work on making the front flex?

thanks Micka
is that Grimace planking on top of you

yeah We should have that up and started in a couple months ......so moneys dried up for now so the A frame front has been put on hold but as soon as i build funds back up it will be happening

Hey Kelvin here's a pic of the truck you may like.

looking good kelvin
you boys gonna be ready for the winter wheeling weekend would be good to catch up again.

Rolly wrote:looking good kelvin
you boys gonna be ready for the winter wheeling weekend would be good to catch up again.

Cheers Brett

yeah both trucks are completed so should be a go for winter wheeling ,i was hoping to get at least a couple drives under my belt before but have been unable to ,finished with not been able to drive it is extremely frustrating
cheers Kelvin

so today did the finishing touches adjusted the kick down on the torque flite so it stays in 1st untill you change it ,then did the final gear box breather
and did the wings ,so now it is really finished just need to get it out for a play now ,