Outer Limits 4x4 Board

Can anyone tell me where to put these 4 vacuum lines on a Rochester quadrajet? Also I would assume that the large one in the front is for fuel, what type of fitting do I need?

http://s102.photobucket.com/albums/m98/ ... =carby.jpg

also there is a vacuum line above the one that says "vent to charcoal canister" where does that one go? And if I have removed the charcoal canister what do I do with those vacuum lines? Where does the vaccum to the brake booster go?

Vaccum to the brake booster should come from the manifold not the carby..

Block the pcv if your manifold doesnt have the valve...it does nothing and is just pollution stuff.....Come to think of it my old holden v8 with a quaddy on it had lots of blocked pipes lol

top one to air cleaner i think . if your not using a cansister just block the ports. holdens & chevs run the booster into the manifold there will be a 3/8 threaded hole between the carby and distributor for a vacum fitting

pcv valve will be in one of the rocker covers do not block it of or the engine will be seriously fumey

thanks guys that should sort it all out.