Outer Limits 4x4 Board

hi, ive asked rovercare to find out for me but havent heard yet and wondering if anyone can help me , i have 90 with 4sp auto ,i have a good 4.4 with spacers i want to run injection and the 4sp auto, do i need a 4.4 fly wheel , do i need a different starter motor, will it be as simple as a straight bolt up , do need a different torque converter, please help

Gday

Is the 4.4 crank std if so u need a adaptor /spacer to fit a rangie flex plate then use the std torque converter and a rangie starter the spacers and the efi is good but the gas set up on the efi is the go

The spacer is only for the torque converter mounting plate, you will need a 4.4 flexplate.

the crank is std as the 4.4 is in my ute with 4sp man , as im going to sell ute body as i need a wagon, i thought this is the go thanks for reply , do you know where i can get a spacer from , as for efi it already on gas,

chrisl wrote:hi, ive asked rovercare to find out for me but havent heard yet and wondering if anyone can help me , i have 90 with 4sp auto ,i have a good 4.4 with spacers i want to run injection and the 4sp auto, do i need a 4.4 fly wheel , do i need a different starter motor, will it be as simple as a straight bolt up , do need a different torque converter, please help

Told you to ring and remind me

well come on then cloughy youve been reminded found out what we need and were to get it so we can do this,

and how do you do the photo near your name

chrisl wrote:well come on then cloughy youve been reminded found out what we need and were to get it so we can do this,

and how do you do the photo near your name

Press profile at the top of the screen, then look down the bottom, its self explainatory from there

You shouldn't be on the computer, do some work slackarse

When i changed mine from a 4.4 to a 3.9 i changed the adapter piece then everything bolted straight back up
If anyone needs one i gave the 4.4 adapter piece to a mate who is able to copy them and turn them out when needed
I just been slack to get this info up though.

can you please find out how much for your mate to make one thanks chris

nottie wrote:When i changed mine from a 4.4 to a 3.9 i changed the adapter piece then everything bolted straight back up
If anyone needs one i gave the 4.4 adapter piece to a mate who is able to copy them and turn them out when needed
I just been slack to get this info up though.

Good stuff, I had one of them somewhere, was from 4.4 to ritters bellhousing to C4, Have to see if I still got it

thanks matt ,
i got to come over and see you about some stuff on weekend hopefully you can find it

Hay ill get as many spacers as you need if you part with the bellhousing for the c4 as i been trying to find one for bloody ages

nottie wrote:Hay ill get as many spacers as you need if you part with the bellhousing for the c4 as i been trying to find one for bloody ages

PMededederated

Hey Nottie

pm sent re spacers - also considering P76 into 90 rangie to replace the 3.9

Cheers
Guy