Page 1 of 1

w/t to n/t diff housing spring plates

Posted: Wed Feb 14, 2007 3:50 pm
by elado
Can anyone tell me if you will get full lock in the steering , On a n/t if you use w/t diff housing , But move the spring plates in on the diff housing too line up with the n/t chassis.Will this stop the tyres rubbing on the springs at full lock :?:

Posted: Wed Feb 14, 2007 4:06 pm
by nicbeer
Depends on your wheel offset and tyres but yes it should as the WT ones are about 2" wider each side

Posted: Wed Feb 14, 2007 4:12 pm
by elado
Cheers thanks for the reply.Elado