2.4 to 2.7
Posted: Thu Feb 15, 2007 8:22 pm
just wondering has any one done and whats involved
Now thats a TOWN.
2.4 desiel to a 2.7 3rz-fe
Just done a 3y to a 2.7 3rz-fe
You will need the
engine
bellhousing + shifter fork & throwout bearing
clutch
clutch slave + master cylinder
wiring harness off the motor
computer
fuel pump ( I used the complete fuel tank from a 2.7 lux, pump in tank)
2 30amp relays
extra wire
wire joiners
Keep your original wiring harness in the car.
Keep the desiel throttle cable.
Then just a bit of wire joining to be done.
Hope this is what you were after.
PM if you want more.