Page 1 of 1

Extended Sway Bar Link Pins

Posted: Fri Feb 16, 2007 4:01 pm
by TassieTroll
Does anyone know of a cheats way to extend Sway Bar link pins for a 2" lift.

There is way too much angle on my front and Rear Sway Bar and it's stopping a bit of articulation! :)

Thanks

Posted: Fri Feb 16, 2007 4:34 pm
by Hoppy11
I bought landcriuser units, they were perfect for a 2 inch lift
Hoppy

Re: Extended Sway Bar Link Pins

Posted: Fri Feb 16, 2007 4:59 pm
by bogged
TassieTroll wrote:Does anyone know of a cheats way to extend Sway Bar link pins for a 2" lift.

There is way too much angle on my front and Rear Sway Bar and it's stopping a bit of articulation! :)
remove the swaybars and toss them in the shed.

Posted: Sun Feb 18, 2007 7:57 am
by Patrolguy
Hi buddy.

This is from a jeep forum but we did it to my GU wagon and it worked a treat. But removed the front swaybar and the GU still goes great on the black stuff.

I extended my rear one 3". I have a 3" lift.

http://go.jeep-xj.info/HowtoSwaybarlinks.htm

I am guessing that you have a Patrol by your usrename. So if a Patrol our swaybar pins are straight so alot easier. Just add the amount of lift you have done, so in your case add 2" of rod.

Cheers.

Matt