Outer Limits 4x4 Board

Hey guys thinking about fitting sals to my classic rangie, as cant afford maxis at the moment. Are they the same ratio as the rangies or different? any help would be much appreciated cheers shaneo

All 110 sals diffs are 3.54:1 - same as your rangie.

Leaf sprung (SIII and perentie 6x6) sals are 4.7 - but these are too narrow/wide respectively for your rangie and don't have coil mounts. Stage 1 V8 are also 3.54:1 but again too narrow.

thanks for the reply was thinking of making mounts and such for leaf sprung series 3 diffs but now knowing that they are to narrow/wide I wont be doing that. Cheers shane

subaman wrote:thanks for the reply was thinking of making mounts and such for leaf sprung series 3 diffs but now knowing that they are to narrow/wide I wont be doing that. Cheers shane

To convert a leafer sals into a coiller, you need to lengthen the long side axle tube by 6" (and fit a longer axle shaft naturally), and weld on all the coiller mounts. However the A-frame mount is cast into the centre, so unless you are fitting custom links (or can do it without welding to the cast centre) it is not a good idea.

It was all going to be custom but sounds like to much of a mission thanks for the advice though

I have a 110 Salisbury for sale, Disc to disc.
its a straight bolt in for a Rangie or Disco 1

PM me if your interested

Thanks for the offer mate but a maxi came up at a to good to be true price so went that way instead.

cheers shaneo