Outer Limits 4x4 Board

Posted: **Sat Nov 22, 2003 3:45 pm**

Hi all,

Pardon my ignorance, but I was just wondering if anyone can tell me if the earlier (G13A) 5-speed gearboxes match up with the bellhousing patterns of the G13B/BA motors?

For example, if someone was wrecking an earlier G13A model car with a reco gearbox, should I grab it for my 1994 model vehicle, which has a noisy box that I couldn't be bothered pulling apart...

Thanks in anticipation

Regards,

Adam

Posted: **Sat Nov 22, 2003 3:59 pm**

I'd only be guessing but if vitara engine fit up to g13a/b gearboxes then the two are the same.

####Disclaimer####
Only a guess
####Disclaimer####

Posted: **Sat Nov 22, 2003 4:06 pm**

hee hee....love your style Steve. Nice disclaimer!!

Posted: **Sat Nov 22, 2003 8:15 pm**

I recently fitted a G13B Swift motor to my G13A box. If its from a 1300 Sierra, no prob, christover.

Posted: **Sat Nov 22, 2003 9:44 pm**

I run a swift motor as well no probs
SAM

Posted: **Sun Nov 23, 2003 4:29 pm**

bigsteve wrote:I'd only be guessing but if vitara engine fit up to g13a/b gearboxes then the two are the same.

####Disclaimer####
Only a guess
####Disclaimer####

A Sierra gearbox WONT bolt straight onto a Vitara motor !!!!!

but all the 1.3 box,s are the same pattern !!!!

Posted: **Sun Nov 23, 2003 11:12 pm**

moose wrote:
bigsteve wrote:I'd only be guessing but if vitara engine fit up to g13a/b gearboxes then the two are the same.

####Disclaimer####
Only a guess
####Disclaimer####

A Sierra gearbox WONT bolt straight onto a Vitara motor !!!!!

but all the 1.3 box,s are the same pattern !!!!

I think there is a slight difference between "fits up to" and "bolt straight on"

Outer Limits 4x4 Board

Gearbox swap question...G13A to G13B/BA?

Gearbox swap question...G13A to G13B/BA?