Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

5 point harnesses

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

5 point harnesses

Post by evanstaniland »

with 5point safety harnesses by whom do they need to be approved by

is SFI approved ok???

is FIA approved ok

which ones are ok ???

cheers
Evan...
Posts: 125
Joined: Sun Jan 29, 2006 11:10 am
Location: Brisbane

Post by blurredvision »

For CAMS events for 5 points SFI 16.1 and FIA 8854/98 or 8853-1985 are acceptable. Iwould be guessing that for most other event organisers that they would probably be similar.
If they meet these approvals then they are much of a muchness. If you are going to use these in dirty enviroments though i would definitly go the hook and latch type and definitly 3 inch webbing.
Try speedway shops for your belts, I got mine from Ian Boettcher's in Ipswich. Ordered over the phone and delivered the following day. Cheap and great service.
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Post by evanstaniland »

would these be ok???

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... &rd=1&rd=1

the guy said they are
These are SFI approved for drag racing
Evan..
Posts: 125
Joined: Sun Jan 29, 2006 11:10 am
Location: Brisbane

Post by blurredvision »

I would not touch them. Rotory cam lock belts look good for circuit racing, but are no good for dirt. They clog up and fail at the wrong moment. For another $20-$30 you can get a good set of hook and loop belts.
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Post by evanstaniland »

Posts: 125
Joined: Sun Jan 29, 2006 11:10 am
Location: Brisbane

Post by blurredvision »

Defintly better!
Try these for better price and choice on method of installation
http://www.iboettcher.com.au/safety.pdf
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Post by evanstaniland »

yea in went and had a chat to a race shop today and he has 5point harnesses with a side latch which the guy said would be good in a dirty environment.

also im also looking at seats do you think a fixet alloy seat with a padded cover would be ok or not ???

evan
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Depends what you drive in the way of terrain, for a buggy I'd be going something that have a bit more give. Suspension seats seem the go these days if you don't enjoy bad backs and bruised kidneys.
Posts: 707
Joined: Fri Jul 22, 2005 10:03 pm
Location: ipswich

Post by jugger »

blurredvision wrote:Defintly better!
Try these for better price and choice on method of installation
http://www.iboettcher.com.au/safety.pdf
there $115.00 this month i pick up alot of there freight in the arvo . i prob picked yours up . there SFI 16.1 i think i read on the belts when they showed me they very excited when i said they got a mention on a forum.
ya got2 b tuff if u gunna b dumb!!
Posts: 125
Joined: Sun Jan 29, 2006 11:10 am
Location: Brisbane

Post by blurredvision »

Back again. If you are after suspension seats try Bob @ Rivmaster. Probably the cheapest for suspension seats, but you do pay for them.
http://hunterrivmasta.com.au/products/P ... m?pcatid=2
I think bang for buck though fixed back seats are the way to go, whether they are aluminum of fibreglass.
Trik Off Road in Melbourne have surprisingly good ones(fibreglass) for $130 each.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest