Page 1 of 1
Replacing sump gasket on td4.2
Posted: Thu Mar 01, 2007 12:35 pm
by davez104
Hey all,
Looks like I've got a bit of oil leaking from around the sump, just wanting to know if this can be replaced without lifting the motor at all. Just by having a quick look, I reckon it shouldn't be too hard, but thought there would be plenty of people here that have done it themselves.
thanks.
Dave.
Posted: Thu Mar 01, 2007 12:40 pm
by jessie928
you dont have to lift the engine to do it
easy as.
Jes
Posted: Thu Mar 01, 2007 4:27 pm
by shakes
looong socket extension for up and around the back.
a tub to put the 40 odd
bolts in.
and a couple of beers...
Posted: Thu Mar 01, 2007 4:27 pm
by tna racing
drain the oil out n unbolt it its easy
Posted: Thu Mar 01, 2007 4:28 pm
by bogged
could you change a sump on a TD42 on a GU without removing the donk? or only change a gasket?
Posted: Thu Mar 01, 2007 4:31 pm
by shakes
late model GQ ('98) sump was removable with a bit of
Posted: Thu Mar 01, 2007 4:37 pm
by tna racing
y would they change the sump set up on a gq dnt u mean a early model gu
Posted: Thu Mar 01, 2007 9:31 pm
by jessie928
you can remove gu and gq without removing engine. just jack the chassis away from the diff to make it slide out easyer
Jes
Posted: Thu Mar 01, 2007 10:00 pm
by bogged
jessie928 wrote:you can remove gu and gq without removing engine. just jack the chassis away from the diff to make it slide out easyer
Jes
thats dude... mine has a large woof in it, would like to remove and repair or replace.
Posted: Fri Mar 02, 2007 7:36 am
by davez104
Thanks guys, should be a pretty simple fix then.
Dave.
Posted: Fri Mar 02, 2007 11:03 am
by tna racing
ur welcome mate