Page 1 of 1
help with 12ht please!!!
Posted: Sat Mar 03, 2007 8:39 pm
by dybes
hello all i have pretty much finished putting the 12ht in my 60
but i have a problem with all the vacuum lines...
does any body have a clear photo of a 12ht in a 60 engine bay so i can work out where they all go...
i am mainly concerned with the ones used for turning the engine off....
cheers
Posted: Sun Mar 04, 2007 7:49 pm
by NHV6
i dont have a 12h-t but the 2h auto is similar which is what i have. there is a vacuum pump on the alternator, which supplies the brake booster and a light blue solenoid valve mounted on your intake manifold. there should be 3 connections on this solenoid. the far left comes from a connection on the throttle body (or whatever its called), the middle one connects to the diaphragm that operates the intake shutterand the one on the right connects to the line that comes from the vacuum pump.
Posted: Sun Mar 04, 2007 8:49 pm
by Dzltec
You will need the vacuum conrol unit to make this work. Did you get all the vacuum hoses from the other vehicle to do this swap. They have a hell of a lot of hoses as standard.. You may be able to wire in a cable to pull the flap shut.
Andy
Posted: Wed Mar 07, 2007 4:21 pm
by sambo
I have a diagram at home on the computer which shows exactly where they all go.
If i remember when i get home i will post it up for you.
Sam
Posted: Wed Mar 14, 2007 7:37 am
by flyology
How did you go with the vaccum hoses.......
I can take a few pictures today of my 12-HT in an 87 60 series if you need them.......
Posted: Wed Mar 14, 2007 5:45 pm
by dybes
i put a vacuum line onto the solenoid and it shuts off fine so i think all is good but if you can post the pics that would be great... cheers
Posted: Wed Mar 14, 2007 5:50 pm
by flyology
let me know what you need to see and I can go out with the camera now and get some shots. How is it going, all up and running?
Posted: Fri Mar 16, 2007 9:56 pm
by mr304
mate you are a bloody legend you dont know how long i have been looking for that diagram cheers mate
Posted: Fri Mar 16, 2007 10:11 pm
by flyology
Re: help with 12ht please!!!
Posted: Wed Apr 27, 2011 9:33 pm
by jack doff
can any of you blokes suggest where to plumb in a boost gauge on my 12ht? any input more than welcome
Re: help with 12ht please!!!
Posted: Wed Apr 27, 2011 10:54 pm
by Dzltec
There will be a hose coming of the ducting between the turbo and inlet manifold that goes to the inj pump. Thats a boost signal.
Andy
